Description
Dewey has been the name serious shooters reach for when it comes to protecting a barrel, and this 26-17S rod is their answer for anyone running a .17 caliber bore. It's a one-piece rod made from hardened, polished stainless steel with a .156 outside diameter, sized specifically to pass through tight .17 cal rifling without binding or rattling around. The ball bearing handle is the detail people remember most, letting the rod spin freely as it tracks the twist of the bore so you get a true, straight pass every time.
Why the 26-17S Stainless Rod Works for .17 Caliber Bores
Unlike Dewey's nylon coated rods, the .17 caliber stainless rods are left uncoated because the bore is simply too small for a coated rod to fit properly. The polished stainless finish is smooth and won't trap grit the way a rougher rod can, which matters a lot when you're cleaning a delicate small caliber barrel. At 26 inches of rod length (plus the handle), it's long enough to run full length rifle barrels chambered in rounds like .17 HMR and .17 Mach 2.
Threads and Jag on the Dewey .17 Cal Rod
This rod uses 5-40 female threads, which is the standard for Dewey's .17 and .20 caliber line. It ships with the 17JM brass brass jag threaded to match, so you're ready to run patches straight out of the package. Since brushes and jags in this caliber thread directly onto the rod, you don't need a brush adapter for .17 cal work. If you want to run larger caliber accessories down the road, Dewey offers a 17A adapter separately that opens the rod up to standard 8-32 male threaded brushes and jags.
Pairing this rod with a bore guide is a smart move for keeping everything centered and your chamber protected while you clean. For .17 caliber owners who care about doing the job right, this is the kind of tool that earns a permanent spot on the bench.
Key Specifications
- Manufacturer: Dewey
- Manufacturer Part Number: 2617S
- Model: 26-17S
- UPC: 608060300322
- Caliber: .17 Caliber (.172)
- Rod Length: 26 inches
- Material: Polished stainless steel, one-piece
- Rod Diameter: .156 O.D.
- Thread Size: 5-40 female
- Handle: Ball bearing handle
- Coating: Uncoated stainless
What’s Included
- Dewey 26-17S .17 caliber stainless steel cleaning rod
- 17JM brass jag
Frequently Asked Questions
Is the Dewey 26-17S rod coated or bare stainless steel?
This rod is uncoated, polished stainless steel. Dewey leaves their .17 and .20 caliber rods uncoated because the bore is too small to fit a nylon coated rod. The polished finish stays smooth and resists picking up grit during cleaning.
What threads does the .17 cal Dewey rod use, and does it come with a jag?
The 26-17S uses 5-40 female threads, which is Dewey's standard for .17 caliber rods. It comes with a 17JM brass jag that threads right on, so you can start running patches out of the package. Brushes and jags in this caliber thread directly onto the rod without needing an adapter.
Will this 26 inch rod work for a .17 HMR rifle?
Yes. At 26 inches of rod length the 26-17S is built for full length .17 caliber rifle barrels, including .17 HMR and .17 Mach 2. The length gives you enough reach to run a patch or brush all the way through most sporting rifle barrels.
Can I use larger caliber brushes with this rod?
Out of the box the rod is set up for .17 caliber accessories with its 5-40 threads. Dewey sells a 17A adapter separately that converts the rod to accept standard 8-32 male threaded brushes and jags for .22 caliber and larger. Without that adapter, stick to .17 caliber accessories.



Reviews
There are no reviews yet.