0
0

Arisaka Defense Offset Plate 18, Holosun 407K & 507K, 1.5″-1.8″

UPC: 601557940056

$25.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the Plate 18 for the Arisaka Offset Optic Mount, cut specifically for the Holosun 407K and 507K footprint and built in the standard height range for 1.5 to 1.8 inch scope mounts. It bolts onto the Arisaka offset base to turn your enclosed-emitter or open-emitter 407K/507K into a fast 45 or 35 degree backup, perfect for close-range work when your magnified optic is dialed up. Worth knowing up front: this is the plate only, so you will need the Arisaka Offset Optic Mount base to run a complete setup.

How the Plate 18 Fits Into the Arisaka System

Arisaka built this mount to be modular. The base stays put on your rail, and you swap plates as your optics change, which means you are not buying a whole new mount every time you pick up a different red dot. The offset angle is set by reversing the stem between the plate and base during assembly, so you can run 35 degrees to tuck the dot up close to a slimmer scope or 45 degrees for clearance around bigger turrets and higher magnification glass. The whole thing is ambidextrous too, so lefties and righties are both covered.

Matching the 407K/507K Plate Height to Your Scope

This is the standard height plate, sized for primary optics mounted in the 1.5 to 1.8 inch range. Picking the plate height that matches your scope mount keeps your cheek weld consistent and makes the transition from magnified glass to the offset dot feel natural instead of a hunt-and-peck. On an AR15 the geometry keeps the optic aligned over the bore and holds a lower 1/3 co-witness height at either offset angle.

Built to Take a Beating

Like the rest of the Arisaka lineup, the plate is CNC machined from 6061-T6 aluminum and finished with a MIL-A-8625 Type III hard coat anodize, so it holds up to recoil, weather, and general abuse. It ships with fresh mounting screws and is made in the USA. One note from the instructions: keep the screws that attach the optic to the plate at or under 20 inch pounds of torque, and check Holosun's spec for the exact number.

Key Specifications

  • Manufacturer: Arisaka Defense
  • Manufacturer Part Number: OOM-P18
  • UPC: 601557940056
  • Optic Compatibility: Holosun 407K, 507K
  • Plate Type: Plate 18, Optic Plate Only (base sold separately)
  • Height Range: Standard height, for 1.5" to 1.8" scope mounts
  • Offset Angle: 35 or 45 degrees, selectable by reversing the stem
  • Material: 6061-T6 aluminum
  • Finish: MIL-A-8625 Type III hard coat anodized
  • Color: Black
  • Weight: 1.9 oz including standard plate (without optic)
  • Co-Witness: Lower 1/3 on AR15
  • Origin: Made in USA

What’s Included

  • Arisaka Offset Optic Plate 18 for Holosun 407K/507K (standard height)
  • Two M4x10mm plate screws

Frequently Asked Questions

Does the Arisaka Plate 18 come with the offset mount base?

No, this listing is for the optic plate only. A complete offset setup needs the Arisaka Offset Optic Mount base plus one optic plate like this one. If you already own an Arisaka base, this plate is all you need to add a Holosun 407K or 507K.

Which Holosun optics fit this plate?

Plate 18 is machined for the Holosun 407K and 507K footprint. It is the standard height version, intended for primary optics mounted in the 1.5 to 1.8 inch range. If your scope sits taller, in the 1.9 to 2.2 inch range, you would want the tall version instead.

How do I set the 35 or 45 degree offset angle?

The angle is chosen during assembly by reversing the stem between the plate and the base. The 35 degree position tucks the dot up closer to slimmer scopes, while 45 degrees gives you more room around wider turrets and bigger magnified optics. No extra parts are needed to switch.

What is the torque spec for mounting the optic?

Do not exceed 20 inch pounds on the screws that fasten the optic to the plate, and always check Holosun's recommended value for your specific red dot. Using thread locker on the screws is a good idea to keep everything locked in under recoil.

Additional information

UPC

601557940056

Manufacturer

Manufacturer Part Number

OOM-P18

Color

Black

Reviews

There are no reviews yet.

Be the first to review “Arisaka Defense Offset Plate 18, Holosun 407K & 507K, 1.5″-1.8″”