0
0

MEC 1-1/8 oz #4-#6 Steel Shot Charge Bar – 502 Progressive

UPC: 098489016711

$30.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading your own steel waterfowl shells on a progressive MEC press, the charge bar doing the work matters just as much as the shot going through it. This is the MEC 502 series progressive bar sized for a 1-1/8 oz drop of #4 to #6 steel shot, and it's the kind of part that quietly makes or breaks a loading session. The bar meters your shot by volume, so every stroke sends the same payload into the shell without you having to think about it.

Why the 502 Steel Bar Matters

MEC splits its charge bars into two worlds, and mixing them up is a common mistake. The 502 designation means progressive, so this bar fits progressive presses including the 650 Super, Grabber, and Hustler. Just as important, steel and lead charge bars are not interchangeable, so this one is purpose built for the harder, lower density steel pellets you shoot at ducks and geese. The 1-1/8 oz, #4-#6 rating tells you both the payload and the pellet range it's designed to handle cleanly.

Setting Up Your 1-1/8 oz #4-#6 Steel Charge Bar

The bar handles your shot side, and it accepts removable MEC powder charge bushings, sold separately, so you can dial in the powder charge your recipe calls for. One thing worth knowing: charge bars drop by volume, not weight. The stamped weight is a solid guideline, but pellet density varies, so it's smart to drop a few charges and check them on a powder scale before you commit to a full run.

Built From Anodized Aluminum

MEC machines these quick-change bars from anodized aluminum, which is why they hold up over thousands of cycles without complaint. Pair it with the right powder bushing and the matching load data from your reloading manual, and you've got a steady, repeatable way to build your own waterfowl ammo at home.

Key Specifications

  • Manufacturer: MEC (Mayville Engineering Company)
  • Manufacturer Part Number: 50211846
  • UPC: 098489016711
  • Series: 502 Progressive
  • Shot Type: Steel Shot
  • Shot Payload: 1-1/8 oz
  • Shot Size Range: #4 to #6
  • Material: Anodized Aluminum
  • Compatible Presses: MEC Progressive (650 Super, Grabber, Hustler)
  • Powder Bushings: Accepts removable MEC powder charge bushings (sold separately)

What’s Included

  • 1-1/8 oz #4-#6 progressive steel shot charge bar (502 series)

Frequently Asked Questions

Which presses does this MEC steel shot charge bar fit?

This is a 502 series progressive bar, so it works in MEC progressive presses including the 650 Super, Grabber, and Hustler. It will not fit single stage presses, which use the 302 series bars. The hole spacing differs between the two, so the series has to match your machine.

Can I use this steel bar with lead shot?

No. MEC makes separate charge bars for lead and steel, and they are not interchangeable. Steel pellets are harder and less dense than lead, so this bar is calibrated specifically for a 1-1/8 oz drop of #4 to #6 steel shot.

Does this charge bar come with a powder bushing?

The charge bar handles the shot side only and does not include a powder bushing. It accepts removable MEC powder charge bushings, which are sold separately, so you can set the powder charge your load recipe calls for. Check your reloading manual or your powder manufacturer's data for the correct bushing.

Will the bar drop exactly 1-1/8 oz of shot?

The bar meters shot by volume rather than weight, so the stamped 1-1/8 oz figure is a guideline. Pellet size and density can vary, so it's a good idea to drop a few charges and weigh them on a reliable powder scale before running a full batch. Once you confirm the drop, you'll know exactly what your bar is throwing.

Additional information

UPC

098489016711

Manufacturer

Manufacturer Part Number

50211846

Reviews

There are no reviews yet.

Be the first to review “MEC 1-1/8 oz #4-#6 Steel Shot Charge Bar – 502 Progressive”