Description
This is MEC's 7/8 oz steel shot charge bar built specifically for #5 and #6 size steel pellets, designed to run in MEC single stage shotshell presses. Unlike a lead shot bar, the cavity on a steel bar is sized to let hard, round steel pellets drop freely without hanging up or binding, which is why MEC keeps its lead and steel bars as separate pieces. If you're loading waterfowl or other non-toxic loads at home, this is the piece that meters your shot charge accurately every pull of the handle.
How the 7/8 oz Steel Shot Charge Bar Works
The charge bar handles the shot side of the equation, dropping a fixed 7/8 ounce volume of steel shot into the wad column. The powder side is controlled separately by a removable MEC powder bushing, which is sold on its own so you can dial in the exact powder charge your recipe calls for. That two-part setup lets you match the bar to a specific load without buying a whole new measuring assembly every time you change powders.
Fitment and Steel Pellet Sizes
This bar is made for MEC single stage machines like the 600 Jr, 600 Jr Mark V, Versamec, and Sizemaster. It's cut for #5 and #6 steel shot, so if you're loading larger pellets you'd want the matching #1-#4 bar instead since the drop cavity changes with pellet size. For steel loading on a single stage press you'll also want MEC's steel shot conversion kit, which swaps in the larger drop tube and shot bottle that let bigger non-toxic pellets feed smoothly.
Build and Everyday Use
MEC machines the bar from anodized aluminum so it holds up to years of handle pulls. A soft insert inside the bar helps eliminate shearing when you're running harder steel pellets, keeping your drops consistent and protecting the shot from getting chewed up on the way through. It's a simple, durable part that does one job well and keeps your home-loaded steel ammo throwing uniform charges.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Company)
- Manufacturer Part Number: 30207856
- UPC: 098489015691
- Shot Charge Weight: 7/8 oz
- Shot Type: Steel
- Steel Shot Sizes: #5 to #6
- Press Type: Single Stage
- Material: Anodized Aluminum
- Compatible Presses: MEC 600 Jr, 600 Jr Mark V, Versamec, Sizemaster
- Powder Metering: Uses removable MEC powder bushings (sold separately)
- Insert: Soft insert to help prevent shearing
- Country of Origin: USA
What’s Included
- MEC 7/8 oz #5-#6 steel shot single stage charge bar (1)
Frequently Asked Questions
Will this steel shot charge bar work in my MEC single stage press?
Yes, it's designed for MEC single stage machines such as the 600 Jr, 600 Jr Mark V, Versamec, and Sizemaster. It will not fit progressive presses like the 650, Grabber, or 9000, which use their own progressive steel bars. Match the bar to the press type and you're good to go.
Can I use this bar for lead shot too?
No. MEC keeps lead and steel charge bars separate because the shot cavity is sized differently, and the two are not interchangeable. This bar is cut specifically for #5 and #6 steel pellets, so stick with steel loads when running it.
Does the charge bar set my powder charge as well?
It only meters the shot side at a fixed 7/8 ounce. Your powder charge is handled by a separate removable MEC powder bushing, which is sold separately and chosen to match your specific load recipe and powder. That split setup lets you fine-tune powder without changing the whole bar.
Do I need anything else to load steel shot on a single stage press?
Along with this bar and the right powder bushing, most folks add MEC's single stage steel shot conversion kit. That kit includes the larger steel shot bottle and drop tube that let bigger non-toxic pellets flow without hanging up. It's worth having if you're setting up for waterfowl loads.



Reviews
There are no reviews yet.