Description
MEC's charge bar sets the amount of shot your press drops every time you pull the handle, and this 7/8 oz Skeet Special version is built for a specific job. When you're loading soft #9 shot on a standard bar, it's easy to throw a charge that creeps past NSSA weight limits. The Skeet Special bar is machined to keep that 7/8 oz drop honest so your competition loads stay in spec without you having to second guess the scale.
This is a 302 series bar, which means it drops right into any MEC single stage reloader like the 600 Jr and Sizemaster. It handles the shot side of the equation, while a removable powder bushing (sold separately) controls the powder charge. That setup lets you dial in just about any recipe you want by swapping bushings to match your powder of choice.
What the MEC Skeet Special Bar Is Made For
The 7/8 oz load is a classic 20 gauge skeet payload, and that's exactly where this bar shines. It's a lead shot bar, so keep in mind lead and steel charge bars are not interchangeable on MEC presses. If you're a registered skeet competitor or just want loads that match the published data, this bar takes the guesswork out of staying consistent round after round.
Build and Everyday Use of the Charge Bar
Machined from anodized aluminum, the bar is built to hold up to a lot of cycles on the press. It comes equipped with a soft insert that helps eliminate shearing when you're running larger or harder lead shot, which keeps your drops smooth and your charges repeatable. With the soft insert doing its work, you also skip the hassle of fussing with a grommet under the shot bottle. Slide it in, pair it with the right bushing, and you're loading clean 7/8 oz skeet rounds in short order.
Key Specifications
- Manufacturer: MEC (Mayville Engineering)
- Manufacturer Part Number: 30278SS
- UPC: 098489011570
- Type: Skeet Special Lead Shot Charge Bar
- Series: 302 (Single Stage)
- Shot Payload: 7/8 oz
- Gauge: 20 Gauge
- Shot Material: Lead
- Material: Anodized Aluminum
- Press Compatibility: All MEC single stage presses (600 Jr, Sizemaster, etc.)
- Powder Adjustment: Accepts removable powder bushings (sold separately)
What’s Included
- MEC 7/8 oz Single Stage Skeet Special Lead Shot Charge Bar (one charge bar)
Frequently Asked Questions
What makes the Skeet Special charge bar different from a standard MEC bar?
The Skeet Special bar is calibrated so your 7/8 oz load stays within NSSA shot weight limits. This matters most when you're loading soft #9 shot, which can push a standard bar's drop over the allowed weight. For registered skeet shooters, it takes the worry out of staying in spec.
Will this charge bar fit my MEC press?
This is a 302 series bar, so it works in all MEC single stage reloaders such as the 600 Jr and Sizemaster. It won't fit progressive presses, which use the 502 series bars instead. If you're running a single stage machine, you're good to go.
Does the charge bar control the powder charge too?
No, the charge bar only sets the amount of shot being dropped. Powder is metered by a separate removable powder bushing, which is sold separately and picked to match your recipe and powder brand. The bar is bored to accept those bushings so you can fine tune your loads.
Can I use this bar with steel shot?
This is a lead shot bar, and lead and steel charge bars are not interchangeable on MEC presses. If you're loading steel, you'll want MEC's dedicated steel shot bar. Keeping them separate protects both your press and your load consistency.





Reviews
There are no reviews yet.