0
0

Hornady .38 Special/.357 Magnum Full Length Sizing Die 046528

UPC: 090255465280

$45.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the Hornady full length sizing die for .38 Special, .357 Magnum, and .357 Remington Maximum, sold as a single die rather than a complete set. It handles the most important job on the bench: squaring up your fired brass back to spec so every case chambers clean and feeds right. If you already run these calibers and just need to replace a sizer or add one to a custom setup, this is the exact piece you're after.

The standout here is the titanium coated sizing ring, often called the gold ring. That coating is harder than standard carbide and runs dry, so you skip the case lube step entirely when working straight-wall pistol brass. It cuts way down on case sticking, reduces friction and wear, and won't scratch up your cases, which translates to longer case life and fewer headaches during a long reloading session.

What Sets This .38/.357 Sizing Die Apart

Hornady builds in the Zip Spindle design, which locks the spindle positively to eliminate slippage during decapping. Light threads cut on both the spindle and collet let you make small incremental adjustments or zip the whole assembly up and down quickly when you need a bigger move. The internal profile is precision machined and hand polished to a smooth finish, and the hardened steel decapping pin holds up even when you're knocking out crimped primers.

Fitting the Full Length Die to Your Press

It uses the standard 7/8"-14 thread, so it threads into any common single stage, turret, or progressive press without adapters. The included Sure-Loc lock ring clamps around the entire die body and tightens with a locking screw that never touches the threads, so your adjustment stays put and the threads stay undamaged. Hornady backs their dies with a reputation for machined craftsmanship that's hard to beat on the reloading bench.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 046528
  • UPC: 090255465280
  • Calibers: .38 Special / .357 Magnum / .357 Remington Maximum
  • Bullet Diameter: .357 in
  • Die Type: Full Length Sizing Die
  • Number of Dies: 1
  • Sizing Ring: Titanium Nitride coated (gold ring), no lube required
  • Spindle: Zip Spindle design
  • Lock Ring: Sure-Loc with wrench flats
  • Thread Size: 7/8"-14
  • Shell Holder Included: No
  • Gun Type: Pistol / Revolver

What’s Included

  • Hornady full length sizing die (1)
  • Sure-Loc lock ring
  • Plastic storage box

Frequently Asked Questions

Do I need case lube with this Hornady .38/.357 full length sizing die?

No, you don't. The titanium nitride coated sizing ring runs dry, so you can size straight-wall pistol brass without lubing cases first. That saves a step and keeps your brass clean.

Is this a complete die set or just the sizing die?

This is the single full length sizing die only (part number 046528), not the full three-die set. If you want the expander and seater dies too, you'd want the complete Hornady set for these calibers. This one is ideal for replacing a sizer or building a custom setup.

What calibers does this die cover?

It sizes .38 Special, .357 Magnum, and .357 Remington Maximum, since all three share the same .357 case diameter. One die handles all three cartridges on the bench. A shell holder is not included, so grab the correct one for your brass if you don't already have it.

Will this die fit my reloading press?

Yes, it uses the standard 7/8"-14 thread found on virtually every common reloading press, including single stage, turret, and progressive models. The included Sure-Loc lock ring holds your adjustment in place without damaging the threads. No adapters needed.

Additional information

UPC

090255465280

Manufacturer

Manufacturer Part Number

046528

Reviews

There are no reviews yet.

Be the first to review “Hornady .38 Special/.357 Magnum Full Length Sizing Die 046528”