Description
Reloading the 30-06 Springfield is one of the most rewarding ways to get more out of this classic cartridge, and the seater die is where your accuracy really comes together. Hornady's Custom Grade New Dimension seater handles that job with a floating bullet alignment sleeve that squares up each bullet before it enters the case mouth, so you get straight, concentric rounds instead of the tilted seating that costs you groups downrange.
What Sets the Custom Grade 30-06 Seater Die Apart
The heart of this die is its in-line seating system. The floating alignment sleeve and floating steel seating stem work together to hold everything in proper alignment through the stroke, which is what gives you that benchrest-style consistency. A built-in crimper lets you add a roll crimp when you want it, and the compression washer gives you fine, repeatable control over seating depth adjustments. The whole thing is machined from select heat-treated steel, so it's built to outlast years of loading sessions.
Fitment and Loading Notes for the 30-06 Seater Die
This is the .308 diameter seater, which means it covers more than just the 30-06. It works with other .308 bullet cartridges including .300 Winchester Magnum and .300 Weatherby Magnum, so if you load across the 30-caliber family it pulls double duty. Keep in mind this is a standalone seater die rather than a full die set, so you'll want a sizing die and the correct shellholder to complete your bench setup. It threads into any standard 7/8-14 press.
Easy to Live With at the Bench
Hornady kept this die simple to run and simple to maintain. The seater stem adjusts with a straightforward screw for setting your overall length, and the die breaks down quickly by removing the retainer ring when it's time to wipe out old lube or buildup. The Sure-Loc lock ring clamps around the full circumference of the threads so your settings stay put, and Hornady backs the whole thing with their no-wear, no-break lifetime guarantee. It's a dependable piece that earns its spot in a 30-06 reloader's kit.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044112
- UPC: 090255441123
- Die Type: Bullet Seating Die
- Series: Custom Grade New Dimension
- Cartridge: 30-06 Springfield
- Also Fits: .300 Winchester Magnum, .300 Weatherby Magnum (.308 diameter)
- Projectile Diameter: .308
- Thread Size: 7/8-14
- Construction: Heat-treated select steel
- Crimp Type: Built-in roll crimper
- Lock Ring: Sure-Loc double-flat lock ring
- Warranty: No-Risk Lifetime Warranty
What’s Included
- Custom Grade bullet seating die
- Sure-Loc lock ring
- Allen wrench for lock ring
- Custom plastic die box
Frequently Asked Questions
Does this Custom Grade 30-06 seater die come as a full die set?
No, this is a standalone bullet seating die, not a complete set. To load start to finish you'll also need a sizing die and the correct shellholder for the 30-06 Springfield. Many reloaders buy the individual seater when they already own a sizer or want to upgrade just the seating step.
Will the 044112 seater die work for cartridges besides 30-06 Springfield?
Yes. Because it's set up for .308 diameter bullets, this die also covers other 30-caliber cartridges including .300 Winchester Magnum and .300 Weatherby Magnum. That makes it a handy pickup if you load across the 30-cal family.
Can this die crimp as well as seat the bullet?
It can. The die includes a built-in crimper that applies a roll crimp when you adjust it to do so. You can also back it off and run seating only if you prefer to crimp separately or skip the crimp altogether.
How does the floating alignment sleeve improve accuracy?
The floating sleeve guides and squares the bullet before it enters the case mouth, so it seats straight rather than at an angle. Combined with the floating seating stem, this in-line system keeps your loaded rounds concentric, which helps tighten groups downrange. It's the main reason this die is popular with accuracy-minded 30-06 reloaders.





Reviews
There are no reviews yet.