Description
If you've got a stash of once-fired military 7.62×51 or crimped .308 brass, you already know the primer pockets won't take a fresh primer until that crimp ring is gone. Hornady's Lock-N-Load Single-Stage Primer Pocket Swage Tool handles that step by pushing the crimp back into shape instead of shaving it away with a reamer. The result is a clean, uniform pocket that seats a new primer without the crunch, the crushed primers, or the little pile of brass shavings a cutter leaves behind.
This tool mounts to any compatible single-stage press. You thread the swage die into the top, drop the included shell holder onto the ram, and run your brass through just like a normal sizing stroke. The swage depth is adjustable, which matters more than you'd think since different headstamps have different web thicknesses. Once you dial it in for a particular brand of brass, it repeats cleanly case after case, and swapping between Lake City, Federal, and commercial .308 is just a small tweak on the adjustment screw.
Why Reloaders Reach for the LNL Swage Tool
Swaging has a real advantage over reaming for crimped pockets. A reamer removes material, and if your angle is off it can gouge the pocket wall or take out too much. Swaging just reshapes the brass with pressure, so you aren't thinning the pocket or risking a loose primer fit down the road. Reloaders who process a lot of surplus brass tend to like how consistent and repeatable the setup stays once it's adjusted.
Getting the Most Out of Your 308/7.62×51 Swage Setup
Take a minute during setup to find the sweet spot. The goal is to swage just enough to seat a primer smoothly, not to crank it down hard. A properly swaged pocket will have a slight radius at the edge and your primers will slide right in. Many folks run a short test batch first, confirm a primer seats clean, then settle in and knock out the rest of the pile. For a dedicated .308 and 7.62×51 brass prepper, it's a straightforward addition to the bench that pays for itself in saved brass and saved hassle.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 041228
- UPC: 090255412284
- Caliber Fit: .308 Win / 7.62x51mm
- Type: Single-Stage Primer Pocket Swage Tool
- Press Compatibility: Any compatible single-stage press
- Swage Depth: Adjustable to fit various case brands
- Function: Removes primer pocket crimps by swaging
- Country of Origin: Made in the USA
- Shipping Weight: 0.525 lb
What’s Included
- Swage tool
- Case handle
- Shell holder
Frequently Asked Questions
What press does the LNL Single-Stage Swage Tool work with?
This is the single-stage version, so it threads into any compatible single-stage press and uses the ram just like a sizing die. It is not the AP press model, which is a separate item designed for the Lock-N-Load AP. If you reload on a standard single-stage press, this is the one you want for 308 and 7.62×51 brass.
What's the difference between swaging and reaming a primer pocket?
Reaming cuts brass away to remove the crimp, while swaging presses the crimp back into shape without removing material. Swaging keeps the pocket wall intact and gives a consistent, repeatable result once it's set. That's a big reason reloaders working through piles of military brass tend to prefer it.
Will this tool handle different brands of 308 brass?
Yes. The swage depth is adjustable, which lets you fine-tune for different headstamps since web thicknesses vary between manufacturers. Once you dial it in for a given brand like Lake City or Federal, it repeats cleanly, and switching brands is just a small adjustment.
Do I need to lubricate the cases before swaging?
A light touch of lube can help the cases run smoother and release cleanly, especially while you're still dialing in the adjustment. The key is getting the swage depth set correctly so cases don't stick at the top of the stroke. Run a short test batch first, confirm a primer seats clean, then settle into the rest of your pile.




Reviews
There are no reviews yet.