Description
Anyone who reloads 308 Winchester or 7.62×51 knows the headache of crimped primer pockets on military and once-fired brass. Those crimps keep a fresh primer from seating, and if you don't deal with them, you're stuck fighting every case. The Hornady Lock-N-Load AP Primer Pocket Swage Tool handles that step for you by reforming the pocket instead of cutting it, so your brass is ready to prime without a bunch of fuss.
This version is built specifically for the Lock-N-Load AP progressive press. It comes with the shell plate and the dies you need for feed, swage, and eject, so the whole process runs as part of your normal press cycle. Rather than trimming or reaming material away, the tool swages the crimp back out of the way, which means no little curls of brass to vacuum up off the bench. That alone is a nice time saver when you're working through a bucket of range brass.
What the 308/7.62×51 Swage Tool Does on the Press
The swage depth is adjustable, which is the detail that makes this tool worth having. Primer pockets vary from one headstamp to the next, and surplus 7.62×51 brass runs the gamut, so being able to dial in how deep the swage goes lets you tune it to whatever cases you're running that day. Set it once for a particular batch and feed cases through.
Fitting the Hornady AP Swage Tool to Your Setup
Keep in mind this is the caliber-specific 308/7.62×51 kit, built around large rifle primer pockets. It's made to work with the Lock-N-Load AP press rather than as a standalone handheld unit, so it's the right pick if you're already running that progressive and want to batch process your rifle brass. It's made in the USA and backed by Hornady's lifetime warranty, which is the kind of support reloaders have come to expect from them.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 041218
- UPC: 090255412185
- Caliber: 308 Winchester / 7.62x51mm
- Primer Size: Large Rifle
- Press Compatibility: Lock-N-Load AP progressive press
- Swage Depth: Adjustable
- Tool Type: Primer pocket crimp swage
- Country of Origin: Made in the USA
What’s Included
- Shell plate
- Feed die
- Swage die/tool
- Eject die
Frequently Asked Questions
Does the 308/7.62×51 swage tool fit any reloading press?
No, this kit is designed to run on the Hornady Lock-N-Load AP progressive press. It includes the shell plate and the feed, swage, and eject dies that work within that press system. If you're not running a Lock-N-Load AP, Hornady also offers a separate single-stage swage tool.
How is swaging different from cutting or reaming the crimp?
Swaging reforms the primer pocket by pressing the crimp back out of the way instead of shaving material off. That means you don't end up with brass trimmings and shavings all over your bench. It's a cleaner process and it doesn't remove metal from the case.
Can I use this swage tool on different brands of 308 and 7.62 brass?
Yes. The swage depth is adjustable so you can set it to accommodate various headstamps and case brands. Since surplus 7.62×51 and military brass can vary quite a bit, dialing in the depth for each batch helps you get consistent results.
Will this tool work on 223/5.56 brass too?
No, this particular model is caliber specific to 308 Winchester and 7.62×51, which use large rifle primers. Hornady makes a separate 223/5.56 version under part number 041217 for small primer pocket brass.





Reviews
There are no reviews yet.