Description
If you run a progressive press and you're tired of placing every single bullet on the case mouth by hand, this RCBS Tube Pistol Bullet Feeder takes that step off your plate. It's a tube-fed, caliber-specific setup built around .380 ACP, 9mm Luger, .38 Special and .357 Magnum bullets in the 90 to 158 grain range. Load up the clear feed tubes, cycle the press, and the feeder drops a bullet right onto the case mouth so it's lined up and ready to seat at the next station. RCBS says the setup can bump your load rate up by roughly 50 percent, which adds up fast over a long reloading session.
How the RCBS Tube Pistol Bullet Feeder Works
The bullet feed die threads into any standard 7/8-inch-14 progressive press station, and plastic bullet fingers inside the die flex open as the case rises to release one bullet at a time. The caliber is set by the correct fingers and a small tube bushing for the 9mm-class bullets, so everything is matched to this projectile range. Each clear tube holds somewhere around 20 to 25 bullets depending on the exact weight and nose profile, and swapping an empty tube for a loaded one keeps you running without breaking rhythm. It drops the bullet into the case mouth for alignment, then your seating die at the following station does the rest.
Bullet Types the 82355 Feeder Handles
One of the nicer things about this feeder is how flexible it is on bullet construction. It'll run jacketed, plated, cast or swaged lead bullets, which covers just about anything a handgun reloader feeds through a progressive. Keep in mind that lead bullet lube can build up on the moving parts over time, so an occasional wipe-down keeps it feeding smooth. It's designed for RCBS five-station progressives like the Pro 2000, and it's been used successfully on other progressive presses as well with the right station setup.
For anyone loading pistol rounds in volume, this is one of those upgrades that pays you back every time you sit down at the bench.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 82355
- UPC: 076683323552
- Type: Tube Pistol Bullet Feeder Kit
- Calibers: .380 ACP, 9mm Luger, .38 Special, .357 Magnum
- Projectile Diameter: .355 to .358 inch
- Bullet Weight Range: 90 to 158 grain
- Press Compatibility: Any 7/8-inch-14 threaded progressive press
- Tube Capacity: Approximately 20 to 25 bullets per tube
- Bullet Types: Jacketed, plated, cast or swaged lead
- Load Rate Increase: Up to 50 percent
- Country of Origin: USA
- Warranty: RCBS Limited Lifetime Warranty
What’s Included
- Bullet feed die body with lock ring
- Caliber-specific bullet fingers
- Bullet guide
- Two clear feed tubes
- Tube caps
- Small tube bushing (for 9mm/.38 class)
- Product instructions
Frequently Asked Questions
What calibers does the RCBS 82355 pistol bullet feeder cover?
This feeder is set up for .380 ACP, 9mm Luger, .38 Special and .357 Magnum using bullets in the 90 to 158 grain range, roughly .355 to .358 in diameter. The caliber is determined by the included bullet fingers and tube bushing, so it's matched to that projectile range right out of the box.
Will this bullet feeder fit my press?
The bullet feed die threads into any standard 7/8-inch-14 progressive press station, so it works on a wide range of progressives. It's designed for RCBS five-station presses like the Pro 2000, with station four being the common spot, and it has also been run successfully on other brands of progressive presses.
Can I use lead bullets in the RCBS tube pistol bullet feeder?
Yes, it handles jacketed, plated, cast and swaged lead bullets, which is one of the handier things about it. With lubed lead bullets, the lube can collect on the moving parts over time, so wiping it down periodically keeps everything feeding cleanly.
How many bullets does each tube hold?
Each clear feed tube holds roughly 20 to 25 bullets depending on the weight and nose profile of what you're loading. You get two tubes with the kit, so you can keep one filled and ready to swap in while the other runs down, and extra tubes are available separately.




Reviews
There are no reviews yet.