Description
If you shoot 6.5x55mm Swedish Mauser out of the same bolt gun and you want your brass to last, a neck sizer die is one of the smartest tools you can add to your bench. This RCBS die resizes the case neck only and leaves the shoulder and body exactly how your chamber fire-formed them. That means less working of the brass, a snug bullet grip, and ammo that chambers with that nice custom fit you get from sizing to your own rifle.
What the RCBS 6.5×55 Neck Sizer Die Actually Does
The die squeezes the neck back down just enough to hold a bullet with proper tension, then the built-in expander-decapping unit pops the spent primer and opens the mouth to the right inside diameter on the way out. Because it never touches the body or shoulder, your cases stay closer to chamber dimensions, which cuts down on stretching and the case head separation that comes from repeated full-length sizing. For 6.5×55 fans running a Swedish Mauser, a Husqvarna, or a modern bolt action, that translates to more reloads per case and tighter, more consistent groups.
Fit, Build, and Setup on the 6.5×55 Swedish Mauser Die
This is a Group A die from RCBS, machined from steel and made in the USA. It uses standard 7/8-14 threads, so it drops into pretty much any single-stage or turret press without any special adapters. Setup is straightforward: thread it in, set your neck sizing depth against the shell holder, and you are running. Keep in mind the shell holder is sold separately, so grab the correct one for the 6.5×55 case head if you don't already have it in your kit.
Neck sizing is really meant for brass that gets fired and reloaded in the same rifle. If you share ammo across multiple rifles or run a semi-auto, a full-length die is the better call. But for the handloader chasing accuracy out of one dedicated bolt gun, this die earns its keep fast.
Key Specifications
- Manufacturer: RCBS
- Model / MPN: 13230
- UPC: 076683132307
- Caliber: 6.5x55mm Swedish Mauser
- Die Type: Neck Sizer Die with Expander-Decapping Unit
- Die Group: Group A (Popular Rifle Cartridges)
- Material: Steel
- Thread Size: 7/8-14
- Shell Holder: Sold separately
- Country of Origin: Made in USA
What’s Included
- RCBS Neck Sizer Die for 6.5x55mm Swedish Mauser
- Expander-Decapping Unit
- Plastic storage box
Frequently Asked Questions
What is the difference between this neck sizer die and a full-length sizing die?
A neck sizer die resizes only the case neck and leaves the shoulder and body fire-formed to your chamber, while a full-length die resizes the entire case back toward factory minimum dimensions. Neck sizing reduces brass stretching and often improves accuracy in a bolt gun fired with its own brass. Full-length sizing is better when you share brass across rifles or feed a semi-auto. For a dedicated 6.5×55 bolt action, this neck sizer die is a great accuracy and case-life tool.
Does the RCBS 6.5×55 neck sizer die come with a shell holder?
No, the shell holder is sold separately. You'll need the correct RCBS shell holder for the 6.5×55 Swedish Mauser case head before you can run it. If you already reload other cartridges you may have a compatible one on hand, so it's worth checking before ordering.
Will this die fit my reloading press?
Yes. The die uses the standard 7/8-14 thread, which fits virtually every single-stage and turret press on the market. Just thread it in, set your depth, and you're ready to load.
Does the die remove the spent primer too?
It does. The built-in expander-decapping unit knocks out the old primer and sizes the inside of the neck for proper bullet tension in the same stroke. That keeps your 6.5×55 case prep quick and simple.





Reviews
There are no reviews yet.