Description
When you're working on scope rings, grip screws, or any of the countless hex fasteners scattered across a rifle or handgun, a quality driver set saves you a stripped screw and a bad afternoon. The Bondhus 13-piece balldriver set runs the full inch-hex range from .050 all the way up to 3/8, so the size you need is almost always sitting right there in the pouch. Each driver is stamped with its size and USA on the handle, which sounds like a small thing until you're squinting to find the right one at the bench.
What Sets the Bondhus 10637 Balldriver Apart
The headline feature here is the ball end. It lets you seat the driver into a hex screw at an angle up to 25 degrees, which is a lifesaver when a rail, mount, or stock is blocking a straight-on approach. The blades are made from Bondhus Protanium high-torque steel, which the company rates at roughly 20 percent stronger with about twice the wear resistance of standard tool steel. That translates to a tip that holds its shape instead of rounding off after heavy use.
Grip and Finish on the 13-Piece Hex Screwdriver Set
Bondhus builds these with a two-component ComfortGrip handle, a tough inner core wrapped in a cushioned outer layer that keeps its bite even when your hands are oily from cleaning solvent or gun oil. The handles are also proportioned to the strength of each tip, so you're less likely to over-torque a small driver and snap it or chew up a screw head. Every driver wears the ProGuard finish, an environmentally friendly coating that resists corrosion and solvents far better than a bare or plated tip.
This is a set built to outlast the project it came in for. It's made in the USA and carries the Bondhus unconditional lifetime warranty, so if a driver ever fails you, they stand behind it. For anyone building out a gunsmithing bench or a home shop drawer, it's the kind of tool set you buy once and stop thinking about.
Key Specifications
- Manufacturer: Bondhus
- Manufacturer Part Number: 10637
- UPC: 037231106379
- Pieces: 13
- Style: Ball End Hex (Balldriver)
- Size Range: .050 in to 3/8 in
- Blade Steel: Protanium High Torque Steel
- Finish: ProGuard Corrosion-Resistant
- Handle: Two-Component ComfortGrip
- Ball End Entry Angle: Up to 25 degrees
- Country of Origin: United States
- Warranty: Unconditional Lifetime
What’s Included
- 13 ball-end hex screwdrivers in sizes .050 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, and 3/8 in
- Vinyl reseal storage pouch
Frequently Asked Questions
What size hex screws does the Bondhus 13-piece set cover?
The set spans the full inch-hex range from .050 up to 3/8 inch, including .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8. That covers just about every SAE hex fastener you'll run into on firearms and general shop work. Each driver is stamped with its size for quick identification at the bench.
What does the ball end on these Bondhus screwdrivers do?
The ball end lets you insert the driver into a hex screw at an angle up to 25 degrees rather than dead straight on. That comes in handy when a rail, mount, stock, or other part blocks a direct approach to the fastener. For straight-on jobs you still get full contact, so it's the best of both worlds.
Are these drivers durable enough for regular gunsmithing use?
They're built from Bondhus Protanium high-torque steel, rated around 20 percent stronger and with roughly twice the wear resistance of standard tool steel. The ProGuard finish adds corrosion and solvent resistance, which matters at a bench full of gun oil and cleaners. On top of that, Bondhus backs the set with an unconditional lifetime warranty.
Is the Bondhus 10637 set made in the USA?
Yes, this set is manufactured in the United States. Bondhus has a long reputation for American-made hex tools, and every driver in this set is stamped with the Bondhus name and USA on the handle.




Reviews
There are no reviews yet.