Description
If you reload and you're tired of picking media out of case necks, the Lyman Turbo Sonic 2500 takes a different approach. Instead of tumbling brass in corncob or walnut, it fills a heated stainless steel tank with solution and uses ultrasonic cavitation at 42,000 Hz to blast away carbon, dirt, and fouling. Those tiny imploding bubbles reach into places dry media never touches, so your cases come out clean on the inside, outside, and down in the primer pockets. This is the 220V version, built to run on 220 to 240 volt power.
What the Turbo Sonic 2500 Gets Done
Capacity is where this unit earns its keep. The 2500ml tank (about 2.6 quarts) will process up to 900 9mm cases in under 15 minutes, or roughly 400 .223 cases, or 250 .30-06 cases per batch. Push-button digital controls and five preset timer cycles running from 90 up to 480 seconds let you dial in how long a load soaks, and the heated tank makes the solution work faster. There's a two-color LED readout so you can keep an eye on the cycle without hovering over it.
Getting the Best Results From Your Turbo Sonic 2500
A word from the reloading bench: ultrasonic cleaning strips fouling, but it does not polish brass to a mirror shine. If you want that showroom gleam, plenty of folks run cleaned cases through a dry tumbler afterward for a quick buff. Warm solution and the right amount of Lyman's case cleaning formula make a big difference too, since cool water or a weak mix is the most common reason brass comes out looking dull. Beyond cases, the tank handles small gun parts, dies, cylinders, and magazines, which makes it a handy addition to any workbench. Always use the included basket so parts never rest directly against the tank floor.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7631702
- UPC: 011516717023
- Voltage: 220 to 240V, 50-60 Hz
- Power Consumption: 160 Watts
- Ultrasonic Frequency: 42,000 Hz
- Tank Material: Stainless Steel SUS304
- Housing Material: ABS Plastic
- Tank Capacity: 2500ml (2.6 qt)
- Tank Size: 9.84 x 5.90 x 3.15 in
- Timer Cycles: 5 presets (90s, 180s, 280s, 380s, 480s)
- 9mm Case Capacity: Up to 900 per batch
- .223 Case Capacity: Up to 400 per batch
- .30-06 Case Capacity: Up to 250 per batch
- Net Weight: 5 lbs 8 oz
- Heated Tank: Yes
What’s Included
- Turbo Sonic 2500 ultrasonic cleaner unit with heated stainless steel tank
- Plastic parts basket
- Lyman Turbo Sonic cleaning solution
- Operating instructions
Frequently Asked Questions
Does the Turbo Sonic 2500 polish brass or just clean it?
It cleans rather than polishes. The ultrasonic action removes carbon, dirt, and residue from inside and outside the case, including the primer pockets, but it won't leave brass with a shiny mirror finish. If you want that polished look, run your cleaned cases through a dry tumbler afterward for a quick buff.
What voltage does this Turbo Sonic 2500 run on?
This is the 220V model, designed to operate on 220 to 240 volt, 50-60 Hz power. Lyman also makes a 115V version under a different part number, so if you're running standard North American household outlets you'll want that one instead.
How many cases can the Turbo Sonic 2500 clean at once?
The 2500ml tank handles up to 900 9mm cases in under 15 minutes. For rifle brass, figure around 400 .223 cases or 250 .30-06 cases per batch. The heated tank and Lyman solution keep cleaning times short.
Can I clean more than just brass cases in it?
Yes. The tank works well on small gun parts, dies, cylinders, and magazines too. Just use the correct solution for what you're cleaning and always keep parts in the basket so they never touch the tank floor directly.




Reviews
There are no reviews yet.