Description
Prepping brass by hand is the slow, tedious part of reloading that nobody looks forward to, and the Lyman Case Prep Xpress 230V was built to fix exactly that. It's an all-inclusive powered station that runs five independently turning spindles off one high-torque, low-RPM gear motor spinning at a steady 125 RPM. That slower, torquey speed is intentional, since case prep cutting operations work best with control rather than raw speed. You hold the brass to the tool and let the machine do the grinding so your hands don't have to.
What the Case Prep Xpress 230V Handles
This unit covers the majority of your prep steps right out of the box. It deburrs and chamfers case necks inside (VLD) and out, cleans and lubricates necks, uniforms and cleans primer pockets, and reams out the primer crimp on military brass. The deburr and chamfer tools cut clean bevels while leaving a nice flat edge across the top of the neck, which matters for both accuracy and brass life. Old military surplus brass with crimped pockets is where a lot of folks really see the time savings.
Smart Layout on the Case Prep Xpress
Every accessory orients straight up, which makes it easy to line your cases up by eye before they touch the cutter. The five spindles all use a common 8/32 thread, so beyond the tools Lyman supplies, you can thread on plenty of other brands' prep tools too. There are extra threaded storage spots along the sides so you can keep around eleven tools right on the machine instead of digging through a drawer, and the removable dump pan catches the brass chips for a quick brush-out when you're done.
Built for Volume Work
If you're running hundreds of cases in a session, this is where the Xpress earns its keep. It cuts down the hand and finger fatigue that comes from twisting hand tools over and over, and the compact footprint means it won't swallow your whole bench. This is the 230V model, so it's set up for international use and ships with a proprietary plug for those outlets.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7810223
- UPC: 011516702234
- Model: Case Prep Xpress 230V
- Voltage: 230V (AC 220-240V, 50-60 Hz)
- Tool Speed: 125 RPM
- Powered Stations: 5 independently turning spindles
- Spindle Thread: 8/32 (accepts other brands' prep tools)
- Dimensions: 10 x 10 x 6 in.
- Weight: Approx. 7.5 lbs
- Body Material: Aluminum
- Collection Pan: Removable brass shavings dump pan
- Plug: Proprietary international plug included
What’s Included
- Case Prep Xpress 230V unit
- Inside Deburr (VLD) Tool
- Outside Deburr Tool
- Primer Pocket Uniformer (Large & Small)
- Primer Pocket Reamer (Large & Small)
- Primer Pocket Cleaner (Large & Small)
- Case Neck Brushes (.25, .30, .38 & .45 caliber)
- Mica Case Neck Lube
- Removable Brass Shavings Dump Pan
- Clean-up Brush
- Proprietary international plug
Frequently Asked Questions
What case prep tasks can the Case Prep Xpress 230V do?
It handles inside (VLD) and outside case neck deburring and chamfering, neck cleaning and lubrication, primer pocket uniforming and cleaning, and reaming the primer crimp out of military brass. It includes attachments for both large and small primer pockets. The one thing it does not do is trim cases to length, so you'll still want a separate case trimmer for that step.
Can I use tool heads from other brands on the Xpress?
Yes. The five powered spindles all use a common 8/32 thread, which is the same standard used by many aftermarket and competitor prep tools. That means you can thread on screw-on accessories from other makers in addition to the full set Lyman supplies.
Does the 230V model work on standard US outlets?
No. This is the 230V (220-240V) version intended for international use, and it ships with a proprietary plug for those outlets. If you're on standard US 115V household power, you'll want the 115V version (model 7810220) instead.
Why does the Case Prep Xpress run at only 125 RPM?
The low, steady 125 RPM paired with a high-torque gear motor is purpose-built for case prep. Cutting operations like chamfering and primer pocket uniforming come out cleaner and more consistent with controlled speed rather than a fast-spinning motor, and the torque keeps the tools from bogging down in tougher brass.




Reviews
There are no reviews yet.