Description
Forster has a reputation among precision reloaders for a reason, and this 7mm Rem Mag set shows why. It brings together two of the brand's core dies in one box, giving you everything needed to size your brass and seat bullets with the kind of consistency that shows up on paper at distance. Each die is machined from quality steel using one-piece reamers, then hand polished before and after heat treating, which is a big part of why these dies hold such tight tolerances.
What the Forster 7mm Rem Mag Die Set Does on the Bench
The full length sizing die works your brass all the way down, sizing the neck, shoulder and body, setting headspace, depriming, and expanding the case neck in one stroke. It uses Forster's elevated E-Z Out expander ball, which sits higher in the die to support the case neck during the sizing stroke and keep the neck and case body in alignment. The floating design corrects minor misalignment and helps keep necks from being pulled off-center, so you get straighter cases with less runout. Running the sizer all the way down returns brass close to factory specs, and if you're loading for one rifle you can back it off slightly to retain more of your fire-formed dimensions.
Why Reloaders Trust the Bench Rest Seater
The standout here is the Bench Rest seater die. Rather than just guiding the bullet and neck, its sliding chamber supports the entire outside diameter of the sized case and lines up the bullet, case and seating stem before any pressure is applied. That straight-line, co-axial approach is a non-crimping design that delivers excellent alignment and repeatable seating depth. It holds its setting well once dialed in, which makes for a smooth, predictable session.
Both dies carry Forster's Cross Bolt Die Lock Ring, which clamps around the full circumference of the die instead of biting a set screw into the threads. That means reliable, repeatable settings and no chewed-up threads when you swap dies in and out. The whole set ships in Forster's Deluxe Die Box, built tough enough to protect your dies and keep your settings safe between range trips.
Key Specifications
- Caliber: 7mm Remington Magnum
- Die Type: Full Length Sizer & Bench Rest Seater
- Number of Dies: 2
- Thread: 7/8"-14
- Material: Hand-polished steel
- Expander: Elevated E-Z Out Expander Ball
- Seater Style: Non-crimping straight-line
- Lock Ring: Cross Bolt Die Lock Ring
- Manufacturer: Forster Products
- Manufacturer Part Number: 004401
- UPC: 757253000454
What’s Included
- Bench Rest Full Length Sizing Die (7mm Rem Mag)
- Bench Rest Seater Die (7mm Rem Mag)
- Cross Bolt Die Lock Rings
- Forster Deluxe Die Box
Frequently Asked Questions
What dies come in the Forster Bench Rest 7mm Rem Mag set?
This set includes a full length sizing die and the Bench Rest seater die, both chambered for 7mm Remington Magnum. The sizer handles neck, shoulder and body sizing plus depriming and neck expansion, while the seater takes care of straight bullet seating. Everything ships in Forster's Deluxe Die Box.
Will these dies fit my press?
Yes. The dies use the standard 7/8"-14 thread, so they'll thread into any common single-stage or turret press that accepts standard rifle dies. The included Cross Bolt Die Lock Rings also fit standard 7/8"-14 dies from most other brands.
What makes the Forster Bench Rest seater different from a standard seater?
The Bench Rest seater uses a sliding chamber that supports the full outside diameter of the case and aligns the bullet, case and seating stem before the bullet is pressed in. This straight-line, non-crimping design produces very low runout and consistent seating depth. It's widely considered one of the best straight-line seating dies made.
Can this set full length size and also bump the shoulder?
Yes. The full length sizing die sizes the case back toward factory specs and sets headspace by bumping the shoulder. If you're loading for a single rifle, you can back the die off slightly to hold more of your fire-formed brass dimensions while still bumping the shoulder as needed.




Reviews
There are no reviews yet.