Description
The Lee Pacesetter 3-Die Set covers the core steps of loading 6mm ARC without making you piece a setup together one die at a time. You get a full-length sizing die, an Easy Adjust Dead Length bullet seating die, and the Lee Factory Crimp Die, plus a universal shell holder and instructions. For folks working with range pickups or brass that's been through different chambers, the full-length sizer brings every case back to spec so it chambers smoothly whether you're running an AR-15 or a bolt rifle.
What the Pacesetter 6mm ARC Dies Do
The full-length sizing die resizes fired brass back to factory dimensions, decaps the spent primer, and sets the shoulder consistently so your rounds feed and chamber reliably. The dead-length seating die uses a floating bullet guide that helps the bullet start straight into the case, which keeps runout down and seating depth repeatable from round to round. That matters with the 6mm ARC, since it's a cartridge built around long, high-BC bullets where small changes in seating depth can show up on paper at distance.
Why the Factory Crimp Die Earns Its Spot
The Lee Factory Crimp Die is a collet-style die that squeezes the case mouth into the bullet from four sides, so you don't need a bullet with a cannelure to get a clean, uniform crimp. It's a solid touch for semi-auto loads where you want to guard against bullet setback during feeding. Because the crimp works independently of seating, it's forgiving of small differences in case length.
Loading the 6mm ARC
The 6mm ARC was introduced by Hornady in 2020 and is based on a 6.5 Grendel-style case necked down to 6mm, giving you excellent long-range ballistics and light recoil out of an AR-15 platform. It typically runs 90 to 110 grain bullets and reloads much like other bottleneck rifle rounds. This particular set does not include a powder dipper or 6mm ARC load data, so you'll want a trusted load manual or published data on hand before you start.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91562
- UPC: 734307915629
- Model: Pacesetter
- Caliber: 6mm ARC
- Set Type: 3-Die Set
- Sizing Type: Full Length
- Seating Die: Easy Adjust Dead Length Bullet Seating Die
- Crimp Die: Lee Factory Crimp Die (collet style)
- Threaded Barrel: No
- Length: 4.8 in
- Shipping Weight: 1.19 lbs
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Factory Crimp Die
- Universal Shell Holder
- Instructions
Frequently Asked Questions
What dies come in the Lee Pacesetter 3-Die Set for 6mm ARC?
This set includes a full-length sizing die, an Easy Adjust Dead Length bullet seating die, and the Lee Factory Crimp Die. You also get a universal shell holder and instructions. It covers resizing, seating, and crimping, which are the three core steps for loading 6mm ARC.
Does the Pacesetter 6mm ARC set come with load data or a powder dipper?
No. This set does not include load data for the 6mm ARC or a powder dipper. You'll want a current reloading manual or published 6mm ARC data on hand before loading.
Do I need bullets with a cannelure to use the Factory Crimp Die?
No. The Lee Factory Crimp Die is a collet-style die that presses the case mouth into the bullet from four sides, so it forms a crimp without needing a crimp groove. It's a good fit for semi-auto 6mm ARC loads where you want to help prevent bullet setback during feeding.
Will this die set work for both AR-15 and bolt-action 6mm ARC rifles?
Yes. The full-length sizing die returns fired brass to factory dimensions, which is ideal for reliable feeding in an AR-15 and works just as well for a bolt gun. If you're loading mixed range brass or cases fired in different chambers, full-length sizing is the way to go.




Reviews
There are no reviews yet.