Description
If you're loading 338 ARC and want the kind of bullet-to-bullet consistency that actually shows up on paper, the RCBS MatchMaster Competition Seat Die is one of the nicest seaters out there. This is a stand-alone seating die cut specifically for 338 ARC, built from case-hardened steel with inside surfaces that are precision-drilled, reamed, and hand-polished before it ever leaves the shop. It finishes off with a deep blued look that wouldn't be out of place on a fine rifle, and it threads into any standard press with the usual 7/8"-14 thread.
What Sets the MatchMaster Seat Die Apart
The heart of this die is its approach to concentricity. A cartridge-specific internal sleeve catches and holds the bullet in line with the case, then a free-floating, self-centering seating stem guides the two together so they meet in perfect alignment all the way through the stroke. That lineup before contact is what produces the concentric rounds this die is known for, and it's the kind of detail that helps shrink groups when you're chasing accuracy.
Dialing In Your 338 ARC Seating Depth
Adjustments are handled by a large oversized micrometer knob with big, easy-to-read letters and hash marks. Dial in a thousandth of an inch and that's exactly what you get, which makes repeatable depth changes quick whether you're fine-tuning a load or jumping between bullet profiles. It's precise to turn and simple to read, even under shop lighting or out at the bench.
Easy Loading With the Seating Window
RCBS included their loading window on this die, so you drop the bullet into the opening and run the press to seat it. No more balancing a bullet on the case mouth or getting fingers too close to the action. Backed by a Limited Lifetime Warranty and proudly made in the USA, the MatchMaster Seat Die is a worthy upgrade for any 338 ARC handloader who takes precision seriously.
Key Specifications
- Manufacturer: RCBS
- Product Line: MatchMaster Competition
- Die Type: Bullet Seating Die Only
- Caliber: 338 ARC
- Manufacturer Part Number: 26140
- UPC: 850079710016
- Thread: 7/8"-14 Standard
- Material: Case-Hardened Steel
- Finish: Deep Blued
- Adjustment: Oversized Micrometer, .001" increments
- Seating Stem: Free-Floating Self-Centering
- Loading Feature: Bullet Seating Window with Retention System
- Warranty: Limited Lifetime
- Country of Origin: Made in USA
What’s Included
- RCBS MatchMaster Competition Seat Die (338 ARC)
Frequently Asked Questions
Does the MatchMaster Seat Die for 338 ARC include a sizing die?
No, this is a stand-alone bullet seating die only. If you need sizing as well, RCBS offers the MatchMaster line in full-length and neck-size options, including Duo sets that pair a seater with a full-length sizing die. For seating, this die covers you on its own.
How precise is the micrometer adjustment on this die?
The oversized micrometer knob lets you dial in bullet seating depth in one-thousandth of an inch increments, and it delivers exactly what you set. The large letters and hash marks make it easy to read and repeatable, which is a big help when fine-tuning a 338 ARC load or switching bullet profiles.
Will the RCBS MatchMaster Seat Die fit my press?
Yes. It uses the standard 7/8"-14 thread, so it threads into any common single-stage or turret reloading press. No special press or adapter is needed.
What makes this die good for concentric ammo?
A cartridge-specific internal sleeve catches and holds the bullet in line with the case, while a free-floating, self-centering stem guides both together through the entire seating stroke. Lining up the case and bullet before they meet is what produces the highly concentric rounds the MatchMaster is known for, which helps tighten groups.







Reviews
There are no reviews yet.