Description
Anyone running a turret press with a head full of dies knows the pain of trying to snake a thin wrench between tightly spaced lock rings. Area 419 solved that with the Zero locking die rings, and this Turret Pack gives you nine 7/8×14 rings plus the dedicated wrench so you can kit out a multiple-slot turret head in one shot. The rings are machined from stainless steel with a black nitride finish, and the wrench is aluminum with a black hardcoat anodize.
What Sets the Zero Die Rings Apart
These aren't your average split-ring lock rings. They run a larger diameter that makes more surface contact with the turret head, so the ring aligns with the press and forces the die to sit square instead of grabbing the die and settling wherever it lands. Each ring carries .350 inches of thread engagement, which Area 419 calls roughly 15 to 25 percent more than common lock rings, giving you about a full extra thread of bite to help square the die to the press. The threads and bottom face are machined in a single operation for flat, true contact surfaces.
Why the Internal Wrench Design Matters
Most lock rings have flats or knurling on the outside, which means wrestling a tool into the gaps between dies. The Zero rings flip that by using internal wrench engagement, so the included wrench drops in from the inside and tightens cleanly even when your turret slots are packed tight. Reloaders consistently point to that detail as the thing that makes a loaded turret head easy to live with.
Good to Know Before You Order
Each ring measures .500 inches thick with a 1.685 inch outside diameter. These are designed for the Area 419 Zero press and work well on single-stage and turret setups, though the larger ring diameter means they won't fit every slot on a Redding T-7. They also don't use a set screw to lock onto the die body, so they're at their best in turret heads and dedicated die setups where a die stays put.
Key Specifications
- Manufacturer: Area 419
- MPN: 419-Zero-7/8X9
- UPC: 850002933895
- Thread Size: 7/8 x 14
- Ring Quantity: 9
- Thread Engagement: 0.350 in
- Ring Thickness: 0.500 in
- Outside Diameter: 1.685 in
- Ring Material: Stainless Steel
- Ring Finish: Black Nitride
- Wrench Material: Aluminum, Black Hardcoat Anodize
- Color: Black
- Country of Origin: USA
- Shipping Weight: 1.76 lbs
What’s Included
- 9 Zero locking die rings (7/8 x 14)
- 1 Area 419 die wrench
Frequently Asked Questions
Will the Area 419 Zero locking die rings work on presses other than the Zero?
Yes. They're designed around the Area 419 Zero press but work well on single-stage and turret presses in general. One thing to note is the larger 1.685 inch outside diameter won't fit every slot on a Redding T-7, so check your slot spacing before ordering.
Do these rings lock onto the die with a set screw?
No, the Zero rings do not use a set screw to clamp onto the die body. They work like a jam nut that tightens against the turret head, which is why they shine in turret heads and dedicated die setups where the die stays installed. If you plan to pull a die in and out constantly, you'll re-set the ring each time.
Why does this pack include nine rings?
The Turret Pack is built to outfit a full turret head or several die stations in one purchase, with nine 7/8×14 rings and one wrench. Reloaders running multiple die wheels on a Zero often put these on every slot so each die stays squared and locked.
What makes the internal wrench design better on a crowded turret?
Traditional lock rings require getting a wrench around the outside, which is a headache when dies sit close together. These rings engage the wrench from the inside, so you can snug them down cleanly even on a packed turret head. It's the feature users mention most when talking about why they like them.




Reviews
There are no reviews yet.