0
0

L.E. Wilson 6.5×47 Lapua Micrometer Bullet Seater Die – Stainless

UPC: 815145022622

$135.52

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

L.E. Wilson has been building inline seating dies since 1927, and this 6.5×47 Lapua micrometer top seater is a big reason their name carries so much weight on the firing line. It's a chamber-type, straight-line die machined from a solid bar of high-grade stainless steel. Instead of relying on threads to align the bullet, the case and bullet are fully captured inside a chamber cut to match the cartridge, then a close-fitting seater stem pushes the bullet straight down into the neck. The fit between stem and bore is tight enough that you can draw a vacuum, and that alignment is what keeps runout low and your loads consistent from the first round to the last.

How the 6.5×47 Lapua Micrometer Seater Works

This is a hand die built to run on an arbor press, though you can use a soft-faced mallet in a pinch if that's all you've got. The process is quick once you find your rhythm: drop a charged, primed case and a bullet into the die body, set it on the included base, and press down on the cap until it bottoms out. Many loaders get down to around ten to fifteen seconds per round. Using an arbor press also lets you feel the seating force the whole way, so you can catch inconsistent neck tension before it ever hits the target.

Micrometer Adjustment You Can Trust

The micrometer head is the star here. It's laser engraved with an easy-to-read scale in .001 inch graduations, so dialing in a new seating depth or jumping between loads for different rifles takes seconds. Major adjustments run through the 3/8-24 cap threads, while the micrometer handles the fine work. That repeatability is why this style of die has been a benchrest staple for generations and has since been adopted across F-Class, PRS, High Power, and Fullbore.

Machined in East Wenatchee, Washington from 416 and 303 stainless for a long, clean-running service life, this die pairs perfectly with quality Lapua brass and good case prep to help you squeeze every bit of accuracy out of your 6.5×47.

Key Specifications

  • Caliber: 6.5x47mm Lapua
  • Die Type: Chamber-Type Inline Micrometer Bullet Seater
  • Adjustment: Micrometer head, .001 inch graduations
  • Cap Threads: 3/8-24 TPI
  • Material: Stainless steel (416 and 303)
  • Press Compatibility: Arbor press or soft-faced mallet (not for conventional threaded presses)
  • Markings: Laser engraved
  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: S65-47L
  • UPC: 815145022622
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 1.0 lb

What’s Included

  • One L.E. Wilson micrometer top bullet seater die (6.5×47 Lapua)
  • Seater base to elevate the primer above the arbor press plate
  • Instructions

Frequently Asked Questions

Do I need an arbor press to use this 6.5×47 Lapua seater die?

An arbor press is the recommended way to run it and gives you the best feel and consistency while seating. You can use a soft-faced mallet if you need to, but it's not ideal for speed or repeatability. Some 7/8 inch presses have a flat spot that works like an arbor press as well. This die is not made for a conventional threaded press.

How does the micrometer adjustment work on this die?

The micrometer head is marked in .001 inch graduations so you can set seating depth precisely and come back to the same number every time. Turn it clockwise to shorten OAL and counter-clockwise to lengthen it, then snug the set screw to lock it in. It makes jumping between loads or rifles quick and repeatable.

Why choose a chamber-type seater over a standard threaded seating die?

A chamber-type die captures the case and bullet in a chamber that mirrors your cartridge, then pushes the bullet straight down with a close-fitting stem. Taking the threads out of the equation keeps the bullet aligned with the case and helps hold runout low. That straight-line design is a big part of why these dies are so popular with precision and benchrest loaders.

Does this seater die also size my brass?

No, this is a bullet seating die only. You'll still need a separate sizing die to prep your 6.5×47 Lapua brass before seating. Pairing it with a good sizer and quality brass is what lets the seater do its job and produce consistent, concentric rounds.

Additional information

UPC

815145022622

Manufacturer

Manufacturer Part Number

S65-47L

Shipping Weight

1.0

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson 6.5×47 Lapua Micrometer Bullet Seater Die – Stainless”