Description
Rob Roberts has spent years dialing in the Raptor Series, and the TSS version is the one you reach for when you're feeding your 20 gauge premium tungsten super shot. TSS runs heavier and harder than lead or steel, so it needs a choke geometry tuned specifically for it. That's exactly what this tube is built around, giving you a tight, dense core pattern that holds together downrange where cheaper chokes start to fall apart.
This particular tube is threaded for the Beretta Optima HP system, so it fits newer Beretta models like the A400 series, 692, 690, DT-11, and select 686 and Silver Pigeon guns. Worth double checking your barrel marking before ordering, since Optima and Optima HP are not the same threading and are not interchangeable. Get the right one and it drops in clean.
What Sets the Raptor TSS Apart
The whole Raptor line uses internal cuts designed to wring maximum pattern density out of the load it's matched to. Where the RR1, RR2, and RR3 tubes are tuned for lead and steel at close, mid, and long range, the TSS tube is purpose-built for tungsten. Folks who've run Raptor chokes on Benelli and Beretta 20 gauge guns note the tighter core compared to standard field chokes, which is the whole point when you're stretching your effective range.
Built From 17-4 PH U.S. Stainless
These are machined from 17-4 PH American stainless steel to tolerances well beyond the usual factory tube. That means it stands up to the pressure and abrasion that hard tungsten loads throw at it, and it shrugs off corrosion when you're out in wet marsh conditions. It's a tube built to last through a lot of seasons.
One fitment note for the over/under crowd: the Raptor design only allows a Raptor choke in one barrel, not both. Keep that in mind if you're running a stacked gun and want to plan your second barrel accordingly.
Key Specifications
- Manufacturer: Rob Roberts Gun Works
- Model: Raptor TSS
- Manufacturer Part Number: 200322
- UPC: 810174902310
- Gauge: 20 Gauge
- Choke System: Beretta Optima HP
- Material: 17-4 PH U.S. Stainless Steel
- Series: Raptor Series
- Optimized For: Premium Tungsten (TSS) Shot
- Intended Use: Wing Shooting / Waterfowl
What’s Included
- Rob Roberts Raptor TSS Optima HP 20 gauge choke tube
Frequently Asked Questions
What shotguns does the Raptor TSS Optima HP choke fit?
This tube is threaded for the Beretta Optima HP system, which covers many newer Beretta guns like the A400 series, 692, 690, DT-11, and certain 686 and Silver Pigeon models. Just remember that Optima HP and standard Optima are different threads and do not swap. Check the marking on your barrel before ordering to be sure you've got the HP system.
What kind of shot should I run through the Raptor TSS choke?
As the name suggests, this tube is built around premium tungsten super shot. TSS is much denser and harder than lead or steel, so the Raptor TSS geometry is cut to pattern that specific load tight and consistent. You'll get the best downrange density when you pair it with quality tungsten ammo.
How is the TSS choke different from the RR1, RR2, and RR3 Raptor tubes?
The RR1, RR2, and RR3 tubes are constriction levels tuned for lead and steel at close, mid, and long range respectively. The TSS tube is its own animal, designed specifically for tungsten shot rather than a range bracket. If you're feeding TSS loads, this is the one you want out of the lineup.
Can I run this choke in both barrels of my over/under?
No. The Raptor design only allows one Raptor choke per over/under, so it can go in a single barrel but not both at once. Plan your second barrel with a standard choke if you're shooting a stacked gun.




Reviews
There are no reviews yet.