Description
The RRaptor RR2 is Rob Roberts' answer for that in-between distance where a lot of wingshooting really happens. Doves crossing a field, mallards dropping into flooded timber, ducks working the decoys at 30 to 40 yards. This is the choke tuned for those birds. It threads into 12 gauge shotguns cut for the Browning and Winchester Invector-Plus system, and the internal cuts are designed to tighten up your core pattern without choking things down so far that you lose your margin for error.
What Sets the RRaptor RR2 Apart
The Raptor series was built on the same thinking as Rob Roberts' original Triple Threat chokes, then pushed further with newer machining technology. The result is a hotter core pattern that stacks more pellets where you're aiming while still keeping useful coverage across the spread. Instead of the traditional knurling you see on a lot of chokes, the Raptor tubes carry machined claw marks and a Cerakote finish on the extended portion, so they look as sharp as they shoot and grip easily for hand tightening.
Built From 17-4 PH Stainless
Rob Roberts machines these from 17-4 PH U.S. stainless steel, held to tolerances well beyond the usual industry standard. That matters in the duck blind where moisture, mud, and steel shot punish lesser tubes. The stainless shrugs off corrosion and stands up to hard, high-volume seasons without wearing out or losing its shape.
Fitment and a Quick Note
This tube fits 12 gauge barrels marked Invector-Plus, which covers a wide range of Browning autos and over-unders along with Winchester SX2, SX3, and SX4 models. Always confirm your barrel is stamped Invector-Plus before ordering, since the systems are not interchangeable. One thing worth knowing on over-under shotguns: the Raptor design only allows placement in one barrel, so pair it accordingly with your setup.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: RRaptor RR2
- Manufacturer Part Number: 200295
- UPC: 810174902044
- Gauge: 12 Gauge
- Choke System: Invector-Plus
- Intended Range: Mid-range
- Best For: Duck and dove hunting
- Material: 17-4 PH U.S. Stainless Steel
- Finish: Cerakote on extended portion
- Style: Extended, machined claw-mark grip
- Series: Raptor
What’s Included
- RRaptor RR2 Invector Plus 12 gauge choke tube
Frequently Asked Questions
What shotguns does the RRaptor RR2 Invector Plus choke fit?
It fits 12 gauge barrels marked Invector-Plus, which includes many Browning autoloaders and over-unders along with Winchester SX2, SX3, and SX4 models. Check the stamp on your barrel near the receiver to confirm it reads Invector-Plus before ordering. The Invector, Invector-Plus, and Invector-DS systems are not interchangeable, so matching the exact system is important.
What range and game is the RRaptor RR2 best suited for?
The RR2 is the mid-range choice in the Raptor lineup, tuned specifically for duck and dove hunting. Think crossing doves, decoying ducks, and flooded timber mallards out to around 40 yards. If you want a tighter setup for geese and open water, that is where the longer-range RR3 comes in, while the RR1 handles close work.
Can I run the RRaptor RR2 in both barrels of my over-under?
No. The Raptor design only allows the choke to be placed in one barrel of an over-under shotgun. You would pair it with a different tube in the second barrel to build out your setup.
Is the RRaptor RR2 safe with steel shot?
Yes, it is built for waterfowl and pairs well with the steel loads most duck hunters run. The 17-4 PH stainless construction is made to hold up to steel shot and wet conditions. As always, match your load and shot size to the choke to get the best pattern out of it.




Reviews
There are no reviews yet.