Description
Turkey hunting comes down to one thing when the tom finally steps into range: does your pattern hold together where it counts. The Raptor Turkey Choke from Johnny Stewart and Rob Roberts Gun Works is built to do exactly that, using a single constriction tuned specifically for turkey loads so you are not second-guessing which tube to run on opening morning.
This one threads into Invector Plus 12 gauge barrels, which covers a big chunk of the Browning and Winchester lineup like the Maxus, Silver, Citori, Cynergy, BPS, plus Winchester SX2, SX3, SX4, SXP, and 101 models. Just double-check that your barrel is stamped Invector Plus, since the Invector systems are not interchangeable with each other.
What Sets the Raptor Turkey Choke Apart
The whole point of the Raptor series is delivering a hotter core pattern at the longer distances where a lot of turkey guns fall apart. It is designed to run well with both TSS and lead, so whether you are loading up expensive tungsten or sticking with proven lead shot, this tube is meant to keep pellets packed tight through the middle of the pattern for cleaner head-and-neck hits.
Built From 17-4 Stainless and Finished to Match
These chokes are machined from 17-4 PH U.S. stainless steel to tolerances well beyond the usual industry standard, so it holds up to season after season of hard use and cleaning. The green Cerakote finish looks sharp and adds corrosion resistance, and the machined claw marks around the tube give you real grip when you are threading it in or backing it out, even with cold or gloved hands. It works with any barrel length too, so it is a solid match for a dedicated turkey gun or a field gun you want to convert.
Bottom line, this is a purpose-built turkey tube from a name that built its reputation on custom barrel and choke work. If you want to tighten up your patterns without turning tube selection into a science project, the Raptor gets you there.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: Raptor Turkey Choke
- Manufacturer Part Number: 200260
- UPC: 810174901696
- Gauge: 12 Gauge
- Choke System: Browning Invector Plus
- Constriction: Single turkey constriction
- Material: 17-4 PH U.S. Stainless Steel
- Finish: Green Cerakote
- Shot Compatibility: TSS and lead
- Design: Extended with machined claw marks
What’s Included
- Raptor Turkey Choke tube (1)
Frequently Asked Questions
Will the Raptor Turkey Choke fit my shotgun?
This model is threaded for the Browning Invector Plus system in 12 gauge, which fits guns like the Maxus, Silver, Citori, Cynergy, and BPS along with Winchester SX2, SX3, SX4, SXP, and 101 models. The key is to check your barrel stamp, since Standard Invector, Invector Plus, and Invector-DS are not interchangeable. If your barrel says Invector Plus, you are good to go.
Can I run TSS through the Raptor Turkey Choke?
Yes. This choke is specifically designed to perform with both TSS and lead shot, so you can load up premium tungsten for maximum reach or run proven lead loads without swapping tubes. It is meant to keep a dense, hot core pattern with either one.
Does the constriction work with any barrel length?
It does. The Raptor Turkey Choke uses a single turkey-specific constriction that patterns well across different barrel lengths, so it works whether you are running a short, maneuverable turkey barrel or a longer field barrel.
What are the claw marks on the choke for?
Those machined claw marks around the body of the tube are there for grip. They give your fingers something to bite into when you are threading the choke in or removing it, which really helps when your hands are cold, wet, or gloved in the turkey woods.




Reviews
There are no reviews yet.