0
0

Rob Roberts T3 Triple Threat Long Range Choke 12 Gauge Invector

UPC: 810174900453

$85.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

When your birds are hanging up high or your trap targets are sitting way out at the edge of your range, the Rob Roberts T3 Triple Threat is the tube you reach for. It sits at the tight end of the Triple Threat lineup, landing somewhere around a light full to improved modified constriction depending on your barrel's bore. That translates to a dense, hard-hitting core of pellets right where you need it for those farther shots that a factory tube tends to let slip through.

What Makes the T3 Triple Threat Tick

Rob Roberts built this choke out of 17-4 PH U.S. stainless steel and machined it to tolerances well past the usual industry mark. The tubes also run a little longer than most stock or aftermarket options, and that extra length is part of the recipe for tighter patterns downrange. The result is a choke that patterns consistently shot after shot, whether you're throwing steel, exotic non-toxics, or lead. Each one is laser engraved for quick identification, so you're never guessing which tube is in the barrel.

Picking the Right Triple Threat for Your Setup

The Triple Threat system skips the old skeet, modified, and full labels and sorts things by range instead. The T1 opens things up for close work like teal, quail, and skeet, the T2 covers the middle ground for flooded timber mallards, dove, and 16 yard trap, and this T3 is the long-range specialist. Rob generally points folks toward the T3 for shotguns with larger bores, since a bit more constriction pairs well with that extra room. If you're stretching out on late-season honkers, pass-shooting ducks, or burying long trap targets, this is the one.

Fitment for the T3 Triple Threat Invector

This particular tube is cut for the standard Browning Invector thread pattern, so make sure your barrel is threaded for Invector before dropping it in. Threading it by hand and checking it stays snug during use will keep everything running right. Pattern it with your go-to load and you'll know exactly what it's doing before you ever head afield.

Key Specifications

  • Manufacturer: Johnny Stewart (Rob Roberts Gun Works)
  • Model: T3 Triple Threat
  • Manufacturer Part Number: 200136
  • UPC: 810174900453
  • Gauge: 12 Gauge
  • Choke Configuration: Browning Invector
  • Range Rating: Long Range (roughly Improved Modified to Light Full)
  • Material: 17-4 PH U.S. Stainless Steel
  • Shot Compatibility: Steel, exotic non-toxics, or lead
  • Style: Extended, laser engraved
  • Country of Origin: United States

What’s Included

  • Rob Roberts T3 Triple Threat 12 gauge Invector choke tube

Frequently Asked Questions

What range is the T3 Triple Threat choke best for?

The T3 is the long-range tube in the Triple Threat lineup, sitting around an improved modified to light full constriction. It shines on high flyers, pass-shooting ducks and geese, and long trap targets sitting out at the edge of your range. If most of your shots are stretched out, this is the one you want in the barrel.

Will this choke fit my shotgun?

This tube is machined for the standard Browning Invector thread pattern, so your barrel needs to be threaded for Invector specifically. It's worth double-checking your barrel's thread pattern before ordering, since Invector, Invector-Plus, and Invector-DS are not interchangeable. When in doubt, check the markings on your barrel or your owner's manual.

Can I shoot steel shot through the T3 Triple Threat?

Yes. The T3 is rated safe for steel, exotic non-toxics like tungsten and bismuth, and traditional lead shot. That versatility makes it a solid pick for waterfowl hunters who need non-toxic loads as well as clay shooters running lead.

Should I get the T2 or the T3?

It comes down to your range and your barrel's bore. The T2 is the mid-range all-arounder that a lot of folks reach for in the 25 to 45 yard window, while the T3 tightens things up for longer shots. Rob generally recommends the T3 for shotguns with larger bores, so pattern both with your favorite load if you can and let the target board decide.

Additional information

UPC

810174900453

Manufacturer

Manufacturer Part Number

200136

Caliber/Gauge

12 Gauge

Reviews

There are no reviews yet.

Be the first to review “Rob Roberts T3 Triple Threat Long Range Choke 12 Gauge Invector”