Description
Rob Roberts built the Triple Threat line to take the guesswork out of picking a choke, and the T2 is the workhorse of the three. It falls right around a light modified constriction, which is the sweet spot for the shots most of us take in the field. Think mid-range mallards in flooded timber, doves crossing at moderate range, sporting clays, and a round of 16-yard trap. Rather than chasing the tightest pattern possible, Rob's whole approach is about even, useful patterns that stay killing distance from roughly 25 to 45 yards, so you hit birds instead of blowing them apart or punching holes a bird can slip through.
What Sets the T2 Triple Threat Apart
These tubes are machined from 17-4 PH U.S. stainless steel, which is the same corrosion-resistant alloy used in a lot of serious turkey and waterfowl chokes. That matters when you're wading marshes or leaving a gun in a damp blind all season. Rob Roberts cuts each choke in a single lathe setup, running the outside and the inside constriction without pulling the tube from the jaws. The payoff is consistent concentricity and a point of impact you can trust from one tube to the next.
Loads That Work With the 20 Gauge T2
This one is set up for the 20 gauge in the Mobil choke thread pattern, so double-check your barrel before you order. The T2 is cleared for lead, steel, HeviShot, Black Cloud, BlindSide, buckshot, and the other non-toxics you're likely to run. Roberts will tell you patterns kill more than pure speed, so the ultra-fast loads aren't his first pick, but you're free to shoot them if that's what's in your bag.
Folks who've run the T2 on doves and ducks tend to keep it in the gun as their everyday tube. It's a smart upgrade if you want more consistency than a factory choke without overthinking your setup. Pattern it with your go-to shell and you'll know exactly what it's doing before opening day.
Key Specifications
- Manufacturer: Rob Roberts Gun Works
- Model: T2 Triple Threat
- Manufacturer Part Number: 200113
- UPC: 810174900224
- Gauge: 20 Gauge
- Thread Pattern: Mobil Choke
- Constriction: Approx. Light Modified
- Effective Range: Roughly 25 to 45 yards
- Material: 17-4 PH U.S. Stainless Steel
- Shot Compatibility: Lead, Steel, HeviShot, Black Cloud, BlindSide, Buckshot and other non-toxics
- Best Use: Mid-range waterfowl, dove, sporting clays, 16-yard trap
- Country of Origin: Made in the USA
What’s Included
- Rob Roberts T2 Triple Threat 20 Gauge Mobil choke tube (1)
Frequently Asked Questions
What constriction is the T2 Triple Threat?
The T2 sits right around a light modified constriction, which Rob Roberts designed as the mid-range tube in the Triple Threat trio. It's built to throw even patterns from about 25 to 45 yards. That covers most real-world shots on ducks, dove, and clays without going too tight.
Will this choke fit my 20 gauge shotgun?
This particular T2 is cut for the Mobil choke thread pattern in 20 gauge, so it fits guns that use that system. Thread patterns vary by make and model, so confirm what your barrel takes before ordering. If you're unsure, check your owner's manual or the markings near the muzzle.
Can I shoot steel and other non-toxic loads through the T2?
Yes. The T2 is cleared for lead, steel, HeviShot, Black Cloud, BlindSide, buckshot, and other non-toxic loads. Rob Roberts recommends patterning your shotgun with your preferred shell to dial in performance, and notes that the very fastest loads don't always pattern as cleanly.
How is the T2 different from the T1 and T3 chokes?
The Triple Threat line skips traditional choke labels for a simple three-step system. The T1 is roughly a skeet constriction for close range, the T2 is about light modified for mid-range, and the T3 runs tighter toward light full for longer shots. The T2 is the most versatile all-around pick for typical hunting distances.





Reviews
There are no reviews yet.