$505.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've ever chased consistent shoulder bump and neck tension across a batch of brass, the Area 419 Zero M-Series 6.5 PRC Sizing Die is built to take that headache off your bench. This is a 1-1/4 inch die that uses a micrometer-adjustable headspace system, so dialing in your bump is a repeatable number rather than a trial-and-error game of shims and feeler gauges. It full-length sizes from the neck all the way to the extractor groove, which is a big part of why reloaders report the sticky-bolt problem disappearing after multiple firings.
The heart of this die is the reamer-cut internal sizing sleeve paired with a precision-ground expander mandrel. Rather than sizing the neck from the outside with a bushing, the mandrel works the inside of the neck on the pull-through, giving you squared-up, consistent tension that doesn't fight whatever thickness variation your brass has. Every die ships with a mandrel set up for roughly .002 inches of neck tension, and if you want to fine-tune, Area 419 sells additional mandrel increments. There's also a hydraulic shoulder pressure relief built into the sleeve, which helps vent trapped sizing lube and keeps you from denting shoulders.
This one matters, so read it carefully. This die requires a Hybrid or 1-1/4 inch turret on your ZERO press or another compatible press. It will not work with a 7/8 inch turret or standard 7/8 inch press. It also needs a larger-diameter ZERO M-Series shellholder, and this package includes that shell holder so you're ready to go out of the box. Standard shellholders will not fit.
Reloaders who've run the M-Series line consistently point to how easy the shoulder bump is to set and how steady the neck tension stays across a full batch. It's a serious piece of kit for anyone loading 6.5 PRC for precision or match work, and it's built and machined entirely in the USA.
This is a 1-1/4 inch die, so it requires a Hybrid or 1-1/4 inch turret on your ZERO press or another compatible press. It will not fit a 7/8 inch turret or a standard 7/8 inch press. If you're running a ZERO press with the right turret, you're set.
Yes. This package includes the ZERO M-Series shell holder along with the die. That's important because these dies need a larger-diameter shellholder rim and will not work with standard shellholders, so having the correct one in the box means you can get going right away.
It uses a precision-ground expander mandrel that sizes the inside of the neck on the pull-through, which gives you consistent tension regardless of neck thickness variation. The die ships with a mandrel set for roughly .002 inches of neck tension. If you want to fine-tune, Area 419 offers additional mandrel increments separately.
During sizing, lube can get trapped between the case shoulder and the die's internal surfaces, which can dent shoulders. The sizing sleeve has a relief hole that lets that trapped material escape, which helps prevent hydraulic dents and adds to more consistent results across a batch.
| UPC | 810080182011 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-ZeroDie-M65PRCSH |
| Shipping Weight | 3.27 |
You must be logged in to post a review.
Reviews
There are no reviews yet.