0
0

Area 419 Zero Press 7/8″ Turret – 9-Station Reloading Head

UPC: 810080180567

$225.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Area 419 Zero Press 7/8" Turret is the extra head that makes the ZERO system shine. Instead of screwing dies in and out between sessions, you leave them set, grab the turret for the caliber you want, and drop it on the press. Each 7/8" turret carries nine die stations, all cut with standard 7/8"-14 threads, which fits the vast majority of sizing, seating, and crimping dies on the market. That's enough room for three full die sets plus an open spot for something like a belling or roll-crimp die.

What the Extra 7/8" ZERO Turret Buys You

The real payoff here is repeatability. Swapping a loaded turret takes roughly 20 seconds, and the head indexes back to the press to under .001". That means the shoulder bump and seating depth you worked out last session are still there when you bolt it back on, no re-measuring, no chasing your setup. The turret locates on an oversized ball-detent system and gets pulled down tight by the ZERO's pull-stud and side lock, so there's no slop or wobble when the ram is working.

How the 7/8" Turret Fits Your Workflow

Most folks who run the ZERO end up with several of these. Keep one dedicated to precision rifle loads, another for volume or plinking ammo, and change calibers without ever breaking a die setting. Each turret ships with a press-fit pull-stud already installed, and the die stations are laser marked 1 through 9 on the outer edge so you always know which die is which. Milled from anodized aluminum, it holds up to regular bench use and shrugs off the occasional bit of weather or garage humidity.

If you're already running the ZERO and you reload more than one or two cartridges, a spare 7/8" head is one of the easiest upgrades you can make to speed up your bench time while keeping your loads consistent.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-Zero-7/8Head
  • UPC: 810080180567
  • Type: Replacement Turret Head
  • Die Stations: 9
  • Thread Pattern: 7/8"-14 (standard die thread)
  • Compatibility: Area 419 ZERO Reloading Press
  • Material: Anodized Aluminum
  • Color: Black
  • Turret Swap Time: About 20 seconds
  • Turret Replacement Repeatability: Under .001"
  • Weight: Approx. 5 lbs
  • Country of Origin: USA

What’s Included

  • Area 419 Zero Press 7/8" turret head with 9 die stations
  • Press-fit pull-stud (pre-installed)

Frequently Asked Questions

What dies will the Area 419 Zero 7/8" turret accept?

It takes standard 7/8"-14 threaded dies, which covers the large majority of sizing, seating, and crimping dies out there. All nine stations are the same 7/8" thread, so you can mix and match brands however you like. This is the standard die size most reloaders already own.

How fast can I change the 7/8" turret on my ZERO press?

A full turret swap takes around 20 seconds. You loosen the side lock, lift off the loaded turret, drop on the new one, and snug it back down. Because it indexes to under .001", your existing die settings stay right where you left them.

Does this turret come with a pull-stud, or do I need to buy one?

The turret ships with a press-fit pull-stud already installed, so it's ready to go on the press out of the box. You don't need to source any extra hardware to start using it.

Are the die stations numbered on the Area 419 Zero 7/8" turret?

Yes, the die stations are laser marked 1 through 9 on the outer edge of the head. That makes it easy to keep track of which die lives in which spot, especially when you're running multiple dedicated turrets for different calibers.

Additional information

UPC

810080180567

Manufacturer

Manufacturer Part Number

419-Zero-7/8Head

Shipping Weight

4.92

Reviews

There are no reviews yet.

Be the first to review “Area 419 Zero Press 7/8″ Turret – 9-Station Reloading Head”