0
0

Forster Bushing Bump Neck Sizing Die Kit – .308 Winchester

UPC: 757253999000

$103.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been chasing tighter groups and longer brass life, the Forster Bushing Bump Neck Sizing Die Kit for .308 Winchester is the kind of tool that earns its spot on the bench. Instead of working your necks hard like a standard full length die, this one lets you size the neck down only as much as needed while nudging the shoulder back just enough for proper headspace. The result is brass that keeps its fire-formed body dimensions and chambers smoothly round after round.

The kit ships with three Forster-selected bushings measuring .336, .334, and .332, which covers most common .308 Win neck wall thicknesses right out of the box. Swapping bushings is how you control neck tension, so you can tune bullet grip to your load without buying extra gear to get started. Forster also offers bushings in .001 inch increments if you want to fine-tune beyond what's included. A decapping assembly is built in, so you deprime at the same time you size, and you have the option of running the expander or leaving it out depending on how uniform your neck walls are.

Why the Forster Bushing Bump Die Earns a Spot on the Bench

The interior is hand polished to a smooth finish, which is a big part of why these dies feel so slick in use. Reloaders running M1A rifles and bolt guns alike have leaned on this die to set shoulder bump precisely, often reporting noticeably smaller groups once they switched over. Doing neck sizing, shoulder bump, and depriming in a single stroke is a real time saver when you're prepping a pile of match brass.

Getting the Most From Your Forster Bushing Bump Kit

A light touch of sizing wax goes a long way here, and keeping the die clean and lightly lubed will keep it running right for years. If you shoot a Forster Co-Ax press you won't need a shellholder, since those presses don't use one. Pair it with a quality seating die and you've got a precision .308 setup that's hard to beat for accuracy-minded handloading.

Key Specifications

  • Caliber: .308 Winchester
  • Die Type: Bushing Bump Neck Sizing Die
  • Bushings Included: 3 (.336, .334, .332 diameter)
  • Decapping Assembly: Included
  • Interior Finish: Hand polished
  • Manufacturer: Forster Products
  • Manufacturer Part Number: BBK2751
  • UPC: 757253999000
  • Country of Origin: USA
  • Shipping Weight: 0.575 lb

What’s Included

  • One Forster Bushing Bump Neck Sizing Die (.308 Winchester)
  • Three neck sizing bushings (.336, .334, .332 diameter), pre-selected by Forster staff
  • Decapping assembly
  • Instructions

Frequently Asked Questions

What bushings come with the Forster Bushing Bump Kit for .308 Winchester?

This kit includes three Forster-selected bushings measuring .336, .334, and .332 in diameter. Those sizes cover most common .308 Win neck wall thicknesses right out of the box. If you need a different size to fine-tune neck tension, Forster offers bushings in .001 inch increments sold separately.

Does the Forster Bushing Bump die also bump the shoulder and deprime?

Yes. The die sizes the neck based on the bushing you install while bumping the shoulder back slightly for proper headspace and smooth chambering. A decapping assembly is included, so depriming happens in the same stroke as sizing.

How do I change neck tension with this die?

Neck tension is controlled by which bushing you install. A smaller bushing sizes the neck down more for a tighter bullet grip, while a larger one leaves more room. You can also choose to run the expander or leave it out depending on how uniform your neck wall thickness is.

Do I need a shellholder to use the Forster Bushing Bump die?

That depends on your press. If you run a Forster Co-Ax press, you won't need a shellholder since those presses don't use one. Standard threaded presses will use the appropriate .308 Winchester shellholder as usual.

Additional information

UPC

757253999000

Manufacturer

Manufacturer Part Number

BBK2751

Shipping Weight

0.575

Reviews

There are no reviews yet.

Be the first to review “Forster Bushing Bump Neck Sizing Die Kit – .308 Winchester”