0
0

Forster 3-in-1 Case Mouth Cutter .308 Cal with Pilot (3CUT-308)

UPC: 757253996436

$73.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever trimmed a pile of brass by hand and then gone back through to chamfer the inside and deburr the outside, you already know how much time this tool can save. The Forster 3-in-1 Case Mouth Cutter for .308 does all three jobs in a single pass. It trims the case to length, cuts a 14-degree chamfer on the inside of the mouth, and puts a 30-degree chamfer on the outside, all while the case spins once in your trimmer. The caliber-specific .308 pilot comes in the box, so you're ready to go for anything that shoots a .308 diameter bullet.

What Sets the Forster 3-in-1 Cutter Apart

This is the first case trimmer accessory to use blades made from US-manufactured carbide steel, and that's the real story here. Those carbide blades hold their edge for the long haul. Used exclusively on brass, they should never need sharpening. Each blade comes factory adjusted on the holder, so the cuts are precise and consistent right out of the gate. The 14-degree inside chamfer plays nicely with both standard flat base bullets and VLD boat tail projectiles, which is a big reason precision handloaders keep this on the bench.

Installing the .308 Case Mouth Cutter

Setup is about as simple as it gets. The cutter slides over the cutter shaft of your Forster Original or Power Case Trimmer and locks down with a single set screw. Once it's dialed in for your trim length, you can move through roughly 250 to 400 cases per hour depending on how you're turning it. Plenty of folks run a cordless screwdriver or the Forster power adapter for larger batches, though hand cranking works just fine for smaller loads.

A Tool Reloaders Keep Coming Back To

The feedback from the reloading community is consistent: this thing does what it promises and does it well. Neck chamfers come out more uniform than most hand tools can manage, and the carbide tips make a clean, chatter-free cut. For anyone chasing benchrest-quality consistency or just tired of running three separate operations, the 3-in-1 cutter earns its spot in the process. Keep in mind that cases longer than 2.20 inches call for a long Case Trimmer Base.

Key Specifications

  • Caliber: .308 (.308 diameter bullets)
  • Functions: Trim to length, inside chamfer, outside chamfer
  • Inside Chamfer Angle: 14 degrees
  • Outside Chamfer Angle: 30 degrees
  • Blade Material: US-manufactured carbide steel
  • Compatibility: Forster Original and Power Case Trimmers
  • Mounting: Slides over cutter shaft, secures with one set screw
  • Trim Rate: 250 to 400 cases per hour
  • Pilot: .308 caliber pilot included
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 3CUT-308
  • UPC: 757253996436

What’s Included

  • Forster 3-in-1 Case Mouth Cutter (.308)
  • Caliber-specific .308 pilot

Frequently Asked Questions

Does the Forster 3-in-1 Case Mouth Cutter come with the .308 pilot?

Yes, the caliber-specific .308 pilot is included in the box. That pilot works with anything shooting a .308 diameter bullet, so you're set for cartridges in that family right out of the package.

What trimmers does this cutter work with?

It's designed to mount on the Forster Original and Power Case Trimmers. The cutter slides over the existing cutter shaft and locks down with a single set screw, so installation takes just a minute or two.

Will the carbide blades need sharpening?

If you use the cutter exclusively on brass cases, the carbide blades should never need sharpening. The blades come factory adjusted on the holder for precise, consistent cuts, and they hold their edge well with proper care.

Do I need a long base for the 3-in-1 cutter?

For cases up to 2.20 inches long, the base that comes with the Original Case Trimmer handles the job just fine. Cases longer than that call for a long Case Trimmer Base, which is sold separately.

Additional information

UPC

757253996436

Manufacturer

Manufacturer Part Number

3CUT-308

Shipping Weight

0.1188

Reviews

There are no reviews yet.

Be the first to review “Forster 3-in-1 Case Mouth Cutter .308 Cal with Pilot (3CUT-308)”