Description
Reloading 300 Blackout comes with a quirk most calibers don't have: a very small shoulder that makes case sizing a little finicky. Forster accounted for that from the start. This Full Length Sizing Die was designed specifically for the 300 AAC Blackout cartridge, with the E-Z Out Expander Ball positioned differently than it is on standard calibers to work around that shallow shoulder. The result is a die that sizes the neck, shoulder, and body in one pass, deprimes the case, and expands the neck ready for the next load.
The heart of the design is Forster's floating E-Z Out Expander system. Instead of yanking the expander ball through the neck as the case comes down, the elevated ball sits high in the die so most of the case is still captured when the neck passes over it. That keeps everything aligned, reduces off-center pull, and protects your case necks. It also means you barely feel the stroke, which is a nice bonus on a long loading session.
What the 300 Blackout Sizing Die Does on the Press
Run fired brass through it and the die bumps the shoulder back to set headspace, squeezes the body and neck down to SAAMI minimum dimensions, and punches out the spent primer in the same motion. That returns brass to factory-new spec for reliable chambering and feeding, whether you're loading for an AR upper or a bolt gun. If you're loading for one rifle, you can back the die off slightly to partial-size and hold onto your fire-formed dimensions.
Built the Way Forster Builds Everything
This die is machined by hand with a one-piece reamer, which is a big part of why Forster dies are known for concentricity. There's a precisely placed vent hole to let trapped air and lube escape so you don't dent cases or damage the die. A knurled lock ring, hardened decapping pin, and adjustable decapping assembly round it out. It threads into standard 7/8-14 presses and drops right into a Forster Co-Ax. Made in the USA and backed by Forster's reputation for quality.
Key Specifications
- Caliber: 300 AAC Blackout
- Die Type: Full Length Sizing Die
- Expander System: E-Z Out Floating Expander Ball
- Thread: 7/8-14 (also fits Forster Co-Ax)
- Machining: Hand machined with one-piece reamer
- Country of Origin: USA
- Manufacturer: Forster Products
- Manufacturer Part Number: 005545
- UPC: 757253996337
- Shipping Weight: 0.46 lb
What’s Included
- One Forster Full Length Sizing Die
- Decapping assembly with hardened decapping pin and floating expander ball
- Forster die body lock ring
- Instructions
- Die box
Frequently Asked Questions
Does the 300 Blackout sizing die come with a shellholder?
No, the shellholder is sold separately. If you're running the die in a Forster Co-Ax press you don't need one at all, since Co-Ax presses use a universal jaw system instead of shellholders. For any other 7/8-14 press, use the shellholder recommended by your press manufacturer.
Will this die work in my standard reloading press or only a Forster press?
It works in both. The die uses a standard 7/8-14 thread so it screws into common single-stage and turret presses, and the included body ring also fits the Forster Co-Ax. You're not locked into any one brand of press to use it.
Why is this 300 Blackout die different from Forster's other full length dies?
The 300 AAC Blackout has an unusually small shoulder, so Forster positions the E-Z Out Expander Ball differently on this specific model than on their standard caliber dies. It even has its own set of instructions for that reason. Everything else about the sizing operation works the same way.
What does the E-Z Out expander do for my brass?
The expander ball sits elevated in the die so the case neck passes over it while most of the case is still held inside the die body. That keeps the neck aligned with the case axis, improves concentricity, and takes it easy on your case necks. It also means very little effort is needed to draw the ball back through the neck.




Reviews
There are no reviews yet.