Description
When you're chasing consistent overall length in your .300 Blackout loads, the seater die is where it all comes together. The Forster Ultra Micrometer Seater Die handles that job with a built-in micrometer head and a floating chamber sleeve that captures the case before the bullet ever starts to seat. That alignment is the whole story here, keeping runout low and your rounds consistent from the first one to the last.
How the Ultra Micrometer Seater Die Keeps Things Straight
This is a non-crimping style seater, so it's built purely around holding the bullet and case in alignment while the bullet is press-fit to depth. The spring-loaded sliding chamber sleeve fully surrounds the case prior to and during seating, which is a big part of why Forster seaters have such a strong reputation for low bullet runout. If you've struggled getting long bullets seated straight in other brands, this is the kind of design that solves that problem.
Dialing In Depth With the Micrometer Head
The micrometer adjustment is what sets the Ultra apart from a standard bench rest seater. It lets you fine-tune seating depth in either direction in increments as fine as .0005 inch, with clearly marked gradations at .001 inch. The bright white markings are easy to read even in a dim reloading room, and since the settings are repeatable, you can record a favorite load and dial right back to it when you switch bullets or come back next session. That alone takes a lot of the trial and error out of finding how far off the lands you want to sit.
Built for the .300 Blackout Handloader
This is a single seater die chambered specifically for .300 AAC Blackout, made in the U.S.A. and backed by Forster's long history in precision reloading tools. It threads into standard reloading presses and works whether you're loading subsonic heavies or supersonic bullets for your Blackout. It pairs naturally with a .300 Blackout sizing die to round out your bench setup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00099
- Model: Ultra Micrometer Seater Die
- UPC: 757253996214
- Caliber: .300 AAC Blackout
- Die Type: Bullet Seating Die
- Die Series: Bench Rest
- Crimping: Non-crimping style
- Micrometer Adjustment: Fine-tuning in either direction, as small as .0005 inch
- Gradations: Marked at .001 inch increments
- Alignment: Spring-loaded floating chamber sleeve
- Country of Origin: Made in U.S.A.
- Shipping Weight: 0.625 lb
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster split-type lock ring
- Storage case
- Instructions
Frequently Asked Questions
Does the Forster Ultra Micrometer Seater Die crimp the case?
No, this is a non-crimping style seater die. It's built to hold the bullet and case in alignment while press-fitting the bullet to a precise depth. If you want to crimp your .300 Blackout rounds, you'll need to handle that in a separate step with a dedicated crimp die.
How precise is the micrometer on this .300 Blackout seater die?
The micrometer head lets you make fine adjustments in either direction down to about .0005 inch, with gradations clearly marked at .001 inch. The white markings are easy to read, and because the settings are repeatable you can record a load and dial right back to it later.
What keeps bullets aligned during seating?
The die uses a spring-loaded floating chamber sleeve that fully captures the case before and during the seating stroke. This keeps the bullet and case in line, which is a big reason Forster seaters are known for producing low runout and consistent concentric rounds.
Will this die work in a standard reloading press?
Yes, it threads into standard reloading presses using common 7/8-14 die threads and installs with the included lock ring. It's a single seater die for .300 AAC Blackout and pairs well with a matching sizing die to complete your setup.




Reviews
There are no reviews yet.