0
0

Forster 6mm Creedmoor Full-Length Sizing Die (005275)

UPC: 757253991646

$57.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster has been building reloading tools for over 80 years, and their reputation for tight tolerances shows up in this 6mm Creedmoor Full-Length Sizing Die. It takes your fired brass and sizes the case neck, shoulder, and body back down, bumps the shoulder to set headspace, deprimes the spent primer, and expands the neck in a single pass. The result is brass that re-chambers cleanly in a SAAMI minimum chamber, which is exactly what you want when you're chasing repeatable results on paper or in the field.

What Sets the Forster 6mm Creedmoor Sizing Die Apart

The standout feature here is the exclusive elevated E-Z Out expander ball. It sits high on the spindle, near the neck of the case, so the neck is still supported inside the die while the expander ball passes through on the way out. That keeps the axis of the neck and the case in alignment, which translates to better concentricity and rounds that run truer. The expander ball runs about 0.001 inch under bullet diameter, and with roughly 0.001 inch of brass springback you end up with solid neck tension on the bullet.

Every Forster die is machined by hand with one-piece reamers to hold concentricity between all the machined diameters, then hand polished before and after heat treating for a smooth interior finish. A precisely located vent hole keeps trapped air and excess lube from denting your cases or damaging the die.

Fitting the Forster Full-Length Die to Your Press

This die ships with a Cross Bolt lock ring that clamps the two ends of a split ring rather than driving a set screw straight into the threads, so your die threads stay protected and your setting stays put between sessions. The included die body ring works in a standard 7/8-14 threaded press as well as a Forster Co-Ax press. If you're running a conventional press you'll need the correct shellholder, which is sold separately. In a Co-Ax, no shellholder is required. It's a straightforward single die, so pair it with a seater of your choice and you're ready to load.

Key Specifications

  • Caliber: 6mm Creedmoor
  • Die Type: Full-Length Sizing Die
  • Die Series: Bench Rest
  • Dies in Set: 1
  • Gun Type: Rifle
  • Thread: 7/8-14 (fits standard and Forster Co-Ax presses)
  • Expander System: Exclusive elevated E-Z Out Expander Ball
  • Lock Ring: Forster Cross Bolt Die Locking Ring
  • Construction: Hand-machined with one-piece reamers, hand polished
  • Country of Origin: Made in the U.S.A.
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 005275
  • UPC: 757253991646

What’s Included

  • One Forster Full-Length Sizing Die
  • Decapping assembly with decapping pin and floating E-Z Out expander ball
  • Forster Cross Bolt die body ring (fits Co-Ax and 7/8-14 threaded presses)
  • Instructions
  • Die box

Frequently Asked Questions

What does the Forster 6mm Creedmoor full-length sizing die do in one pass?

It sizes the case neck, shoulder, and body, bumps the shoulder back to set headspace, deprimes the fired case, and expands the neck. That returns your fired 6mm Creedmoor brass to a size that will re-chamber in a SAAMI minimum chamber. It's a complete sizing operation in a single stroke of the press.

Does this die come with a shellholder?

No, the shellholder is not included and is sold separately if you're running a standard 7/8-14 threaded press. If you're using a Forster Co-Ax press, you don't need a shellholder at all since those presses don't use one. The die itself includes the body ring, decapping assembly, and expander ball.

What makes the E-Z Out expander ball different from a standard die?

Forster positions the expander ball high on the spindle, near the case neck, so the neck stays supported inside the die while the ball passes through on the way out. That keeps the neck and case axis in alignment and helps produce more concentric ammo. It's a Forster exclusive and the main reason these dies have the reputation they do.

Will this Forster die work for a straight full-length sizing job, or is it only for bench rest shooters?

It's part of Forster's Bench Rest line, but the term just reflects the quality level. Forster makes one grade of die and it's top quality across the board. This works great for everything from match loads to general handloading for any 6mm Creedmoor rifle.

Additional information

UPC

757253991646

Manufacturer

Manufacturer Part Number

005275

Shipping Weight

0.495

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm Creedmoor Full-Length Sizing Die (005275)”