Description
If you're loading 6.5 PRC and chasing tighter groups, the Forster Full Length Sizing Die is one of those pieces of gear that quietly earns its spot on the bench. It sizes the case neck, shoulder, and body in one pass, bumps the shoulder back to set your headspace, deprimes, and expands the neck as the case comes back out. The result is brass sized down to minimum SAAMI dimensions, which means your loaded rounds chamber cleanly in just about any 6.5 PRC rifle.
What Sets the Forster 6.5 PRC Sizer Apart
The big story here is the elevated E-Z Out expander ball. Instead of sitting down near the base of the case like a conventional die, Forster positions the expander ball just under the neck portion of the die. The neck passes over it while most of the case is still captured and supported, which keeps everything in line and cuts down on runout. That translates to straighter necks and bullets that head into the rifling true, and more precise reloaders tend to notice it on paper.
Built the Way Forster Builds Everything
Each die is machined by hand using one-piece reamers, which helps guarantee concentricity across all the machined diameters. A precisely placed vent hole keeps trapped air and sizing lube from damaging your cases or the die itself. Forster only makes one grade of die, and it's bench rest quality across the board, so there's no stepping up to a fancier version later. Folks who have run these for years tend to mention tight, consistent tolerances and smooth sizing once the expander is dialed in per the instructions.
Press Compatibility
The die comes with Forster's Cross Bolt lock ring and threads into any standard 7/8-14 reloading press. Running it in a Forster Co-Ax press is a nice bonus since no shellholder is required there. For 6.5 PRC loaders who want repeatable brass prep and a glove fit to the chamber, this is a tool that does its job and stays out of the way.
Key Specifications
- Caliber: 6.5 PRC
- Die Type: Full Length Sizing Die
- Die Series: Bench Rest
- Expander System: Elevated E-Z Out Expander Ball
- Machining: Hand machined with one-piece reamers
- Thread: 7/8-14 (standard press compatible)
- Lock Ring: Forster Cross Bolt Die Locking Ring
- Expander Ball Diameter: 0.001" under bullet diameter
- Country of Origin: Made in the U.S.A.
- Manufacturer: Forster Products
- Manufacturer Part Number: 005349
- UPC: 757253991318
- Shipping Weight: 0.53 lb
What’s Included
- One Forster 6.5 PRC Full Length Sizing Die
- Decapping assembly with decapping pin and floating expander ball
- Forster Cross Bolt Die Locking Ring
- Die box
- Instructions
Frequently Asked Questions
What does the Forster 6.5 PRC full length sizing die actually do to my brass?
It sizes the case neck, shoulder, and body in a single stroke, bumps the shoulder back to set headspace, deprimes the spent primer, and expands the neck as the case is withdrawn. This brings fired brass back to minimum SAAMI dimensions so your loaded rounds chamber reliably. It's the die most reloaders reach for first because of how much flexibility it offers.
What makes the E-Z Out expander ball different from a standard die?
On most dies the expander ball sits near the base of the case, but Forster places it high on the spindle just beneath the neck portion of the die. The neck passes over the ball while the case is still mostly captured and supported, which keeps the neck and body in line. The payoff is better concentricity and less runout in your finished ammo.
Will this die work in my press?
Yes. It uses standard 7/8-14 threads, so it fits conventional single stage and turret presses, and it ships with Forster's Cross Bolt lock ring. If you run a Forster Co-Ax press, you won't need a shellholder since those presses don't require one.
Do I need any other dies to load 6.5 PRC with this one?
This is a sizing die, so you'll still want a seater die to set your bullets. Forster offers a matching Bench Rest Seater Die for 6.5 PRC, and the two are available together as a set. For bullet grip, Forster's standard expander ball runs about 0.001 inch under bullet diameter.





Reviews
There are no reviews yet.