Description
If you're loading 6mm ARC and chasing consistency, the Forster Bench Rest Full Length Die Set gives you the two dies that matter most in one box. This set brings together Forster's Full Length Sizing Die and the Bench Rest Seater Die, both cut on super-precision lathes from quality steel. These are the dies that have earned Forster a reputation with some of the pickiest reloaders out there, and they carry the Forster cross bolt lock rings as standard equipment.
What the Forster 6mm ARC Sizing Die Does
The full length die sizes the case body and neck, bumps the shoulder back to set your headspace, and deprimes in the same stroke. What sets it apart is the elevated E-Z Out floating expander ball. The neck passes over the expander while most of the case is still captured inside the die, which keeps everything aligned and improves concentricity. The washer system up top lets the expander correct small misalignments instead of yanking the neck off center, and that shows up on paper downrange.
Straight-Line Seating With the Bench Rest Seater
Forster was the first to build a true straight-line Bench Rest seater, and it's still one of the best going. The seater die aligns the bullet and the cartridge case before the bullet ever starts into the neck. The whole case gets held inside the alignment chamber, so the bullet goes in dead straight rather than tipping as it seats. For a cartridge like 6mm ARC that a lot of folks run in precision and gas gun builds, that kind of runout control makes a real difference.
Fit and Finish on the 6mm ARC Die Set
Everything ships in Forster's Deluxe Die Box, and the cross bolt lock rings clamp around the full die body instead of digging a set screw into the threads. That means repeatable settings every time you swap dies in and out, with no thread damage to deal with. These are standard 7/8-14 thread dies, so they'll run in any common single-stage press and shine on a Forster Co-Ax.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 6mm ARC
- Die Type: Full Length Sizing Die & Bench Rest Seater Die
- Number of Dies: 2
- Manufacturer Part Number: 004178
- UPC: 757253990922
- Thread: 7/8-14
- Expander: E-Z Out Floating Expander Ball
- Lock Rings: Forster Cross Bolt
- Packaging: Deluxe Die Box
- Shipping Weight: 1.54 lbs
What’s Included
- Forster Full Length Sizing Die (6mm ARC)
- Forster Bench Rest Seater Die (6mm ARC)
- Decapping assembly with decapping pin and floating expander ball
- Forster cross bolt lock rings
- Deluxe Die Box
Frequently Asked Questions
What dies come in the Forster 6mm ARC Bench Rest set?
This two-die set includes the Forster Full Length Sizing Die and the standard Bench Rest Seater Die. The sizer handles case body and neck resizing, shoulder bump, and depriming, while the seater aligns the bullet and case for straight-line seating. Both dies come with Forster's cross bolt lock rings in a Deluxe Die Box.
Does this set include a micrometer seating die?
No. This is the standard Bench Rest Seater configuration, not the Ultra Micrometer version. It still delivers Forster's excellent straight-line seating and bullet alignment, just without the micrometer adjustment top. If you want fine micrometer adjustments, that's a separate Forster Ultra die set.
Will these Forster dies work in my press?
Yes. These are standard 7/8-14 thread dies, so they'll thread into any common single-stage reloading press. They're also a natural match for the Forster Co-Ax press and work with other standard brands of presses as well.
What makes the Forster full length sizing die different?
The key feature is the elevated E-Z Out floating expander ball. The case neck passes over the expander while most of the case is still held inside the die, which keeps the neck aligned and improves concentricity. The result is straighter, more consistent brass round after round.



Reviews
There are no reviews yet.