Description
This Forster Bushing Full Length Sizer Die Kit handles .308 Winchester and 7.62 NATO brass the way a precision reloader wants it done. The die sizes the case body, bumps the shoulder back to fit a minimum-spec SAAMI chamber, and resizes the neck using an interchangeable bushing rather than a fixed neck diameter. That setup lets you control how much the neck gets worked, which keeps your brass alive longer and gives you repeatable bullet tension load after load.
What separates a bushing die from a standard sizer is flexibility. Brass neck wall thickness varies between brands and lots, so instead of being locked into one neck diameter, you swap the bushing to match your cases and your preferred tension. The kit ships with three Forster bushings in .332, .334, and .336, and the common rule of thumb is to pick a bushing roughly .002 inch under the neck diameter of a loaded round. One of the three will land you right where you want for most factory and premium .308 brass.
What the .308 Win Bushing Full Length Die Brings to the Bench
Every one of these dies is hand polished and built to Forster's benchrest standard. The body comes with an etched reference line and the Forster Accu-Lock-Ring, so once you set your shoulder bump you can return to that exact setting every session without guesswork. The lock ring uses a cross-bolt clamp that grips the threads without marring them, which is a detail precision guys appreciate.
Getting the Most From This Forster Bushing Die Kit
Forster reloading dies have a strong reputation for producing concentric, low-runout ammo, and this full length design is a workhorse for both hunting rifles and target loads. It runs in any standard 7/8-14 press and works great in a Forster Co-Ax, where you don't even need a shellholder. If you want to fine-tune neck tension further down the road, you can pick up additional Forster bushings in .001 inch increments and keep the same die.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: FBK4751
- UPC: 757253990557
- Cartridge: .308 Winchester / 7.62 NATO
- Die Style: Bushing Full Length Sizing Die
- Included Bushings: .332, .334, .336
- Material: Steel
- Thread Size: 7/8-14
- Finish: Hand Polished
- Lock Ring: Forster Accu-Lock-Ring with etched reference line
- Shipping Weight: 0.575 lbs
What’s Included
- Forster Bushing Full Length Sizing Die (.308 Win)
- Three Forster neck bushings (.332, .334, .336)
- Forster Accu-Lock-Ring
- Decapping / expander assembly
Frequently Asked Questions
What bushings come with the Forster .308 Win bushing full length die kit?
The kit includes three Forster bushings sized .332, .334, and .336, selected by Forster staff to cover most common .308 Winchester brass. A good starting point is to measure a loaded round at the neck and choose a bushing about .002 inch smaller. One of the three supplied sizes usually gets you the tension you're after.
Does this die full length size or just the neck?
This is a full length bushing die, so it sizes the body, bumps the shoulder back, and sizes the neck all in one stroke. The body and shoulder are brought down just enough to fit a minimum-spec SAAMI chamber for reliable chambering. The bushing handles the neck, so you only work the neck as much as needed rather than overworking it.
Will this Forster die fit a standard reloading press?
Yes, it uses the standard 7/8-14 thread and runs in any common single stage or turret press. It also works well in a Forster Co-Ax press, where no shellholder is required. The Accu-Lock-Ring and etched reference line let you reset your adjustment the same way every time.
Can I buy extra bushings to fine-tune neck tension?
Absolutely. Forster offers bushings in .001 inch increments, so if you neck turn, run a particular brass brand, or want slightly more or less tension, you can add bushings and keep using the same die. Just note this die is designed for Forster bushings and does not use Redding or Wilson bushings.




Reviews
There are no reviews yet.