0
0

Forster Bushing Full-Length Ultra Die Set, 6.5 Creedmoor (UFB4271)

UPC: 757253990489

$230.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 6.5 Creedmoor and want control over every part of the process, this Forster set is built for exactly that kind of attention to detail. It pairs a Bushing Full Length Sizing Die with the Bench Rest Ultra Micrometer Seater Die, giving you one tool to manage neck tension and shoulder bump, and another to lock in seating depth with repeatable accuracy. Everything is machined in the USA and comes packed in Forster's Deluxe Die Box.

What the Forster Bushing Full-Length Sizing Die Does

The sizing die is where the real tuning happens. It sizes the case body and bumps the shoulder back to set correct headspace, while the interchangeable bushing handles the neck separately. Because the bushing only works the neck as much as you need, you avoid overworking the brass, which helps extend case life and keeps neck tension consistent from one reload to the next. The die also ships with the Forster Accu-Ring, a laser-marked lock ring with reference marks in .001 inch increments so you can make precise shoulder bump adjustments without guessing.

Dialing In Neck Tension With the Included Bushings

Forster includes three bushings pre-selected for 6.5 Creedmoor, sized at .288, .290, and .292 inch. A good starting point is to pick a bushing roughly .002 inch under the neck diameter of a loaded round, then adjust from there based on how your rifle shoots. Bushings are also sold separately in .001 inch steps if you want to fine-tune for different brass neck wall thickness.

The Bench Rest Ultra Micrometer Seater

The seater is a non-crimping, straight-line design that keeps the bullet and case aligned while the bullet is press-fit into place. The micrometer head lets you adjust seating depth in either direction in fine increments, so chasing the lands or testing different jump distances becomes a quick, repeatable process. Between the sizer and the seater, this set gives precision-focused 6.5 Creedmoor handloaders the kind of consistency they're after at the bench.

Key Specifications

  • Cartridge: 6.5mm Creedmoor
  • Die Style: 2-Die Set
  • Material: Steel
  • Included Bushings: .288, .290, .292 inch
  • Sizing Die: Bushing Full Length with Accu-Ring
  • Seater Die: Bench Rest Ultra Micrometer (non-crimping)
  • Country of Origin: Made in USA
  • Manufacturer: Forster Products
  • Manufacturer Part Number: UFB4271
  • UPC: 757253990489
  • Shipping Weight: 1.49 lbs

What’s Included

  • One Forster Bushing Full Length Sizing Die with Accu-Ring
  • One Forster Bench Rest Ultra Micrometer Seater Die
  • Three bushings sized .288, .290, and .292 inch
  • Deluxe Die Box storage case
  • Instructions

Frequently Asked Questions

What bushings come with the Forster 6.5 Creedmoor die set?

The set includes three bushings pre-selected by Forster for 6.5 Creedmoor, sized at .288, .290, and .292 inch. A common approach is to choose a bushing about .002 inch smaller than the neck diameter of a loaded round. If you need a size outside those three, Forster sells bushings separately in .001 inch increments.

Does this die set bump the shoulder as well as size the neck?

Yes. The Bushing Full Length Sizing Die sizes the case body and bumps the shoulder back to set proper headspace, while the bushing controls neck tension separately. The included Accu-Ring has laser-etched marks in .001 inch increments to help you set your shoulder bump precisely and repeat it.

Is the Ultra Micrometer Seater a crimping die?

No, the Bench Rest Ultra Micrometer Seater is a non-crimping, straight-line seater. It holds the bullet and case in alignment while the bullet is press-fit, and the micrometer head lets you fine-tune seating depth in either direction. That makes it easy to test different jump distances or chase the lands.

Why run a bushing die instead of a standard full-length die?

A bushing die lets you control exactly how much the neck is worked, rather than oversizing it and then expanding back up. Working the neck less helps preserve the brass and keeps neck tension more consistent, which can extend case life and tighten your groups. It's a popular setup for precision and competition handloaders.

Additional information

UPC

757253990489

Manufacturer

Manufacturer Part Number

UFB4271

Shipping Weight

1.49

Reviews

There are no reviews yet.

Be the first to review “Forster Bushing Full-Length Ultra Die Set, 6.5 Creedmoor (UFB4271)”