0
0

Forster 7mm PRC Bench Rest Full Length Die Set (Sizer + Seater)

UPC: 757253990427

$115.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster 7mm PRC Full Length Die Set is a two-die package that covers the two jobs that matter most for feeding your 7 PRC rifle: resizing fired brass and seating bullets dead straight. You get a full length sizing die and a standard Bench Rest seating die, both built to the hand-fit tolerances that put Forster tooling on the benches of some of the pickiest reloaders around. The "S" (Standard) jaws come factory installed, so it's ready to go once you have a shell holder sorted out.

What the 7mm PRC Sizer Die Does

The full length sizing die works the neck, shoulder, and body in one stroke, bumping the shoulder back to set headspace while it deprimes and expands the neck. That brings your fired brass back down to fit a SAAMI minimum chamber, which is exactly what you want for a smooth-chambering hunting or match round. The standout here is Forster's elevated E-Z Out expander ball. It's mounted high on the decapping assembly and rides a butyl rubber washer, so it self-corrects for any misalignment and keeps case necks concentric as the expander passes through. It does its work near the bottom of the stroke where your press has the most leverage, so the pull feels light.

Why the Bench Rest Seater Earns Its Name

The Bench Rest seater uses a close-fitting sliding chamber that captures the case, bullet, and seating stem all in line before the bullet ever moves. Instead of supporting just the neck, it holds the entire outside diameter of the sized case, which is the whole reason these seaters produce such low runout. It's a non-crimping, straight-line design built for consistency round after round.

Running the 7mm PRC Die Set

Both dies use the standard 7/8-14 thread, so they'll thread into any common press, and the die body ring works in a Forster Co-Ax as well. Drop the sizer and seater into the included box and your settings stay put between sessions. If you're loading 7mm PRC and want brass that chambers clean with bullets seated true, this set is a dependable foundation.

Key Specifications

  • Caliber: 7mm PRC
  • Die Type: Full Length Sizing + Bench Rest Seating
  • Series: Bench Rest
  • Number of Dies: 2
  • Jaws: "S" (Standard) factory installed
  • Thread: 7/8-14
  • Expander System: Elevated E-Z Out Expander Ball
  • Seater Style: Non-crimping straight-line
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004390
  • UPC: 757253990427
  • Shipping Weight: 1.59 lbs

What’s Included

  • One Forster 7mm PRC Full Length Sizing Die
  • One Forster 7mm PRC Bench Rest Seating Die (standard)
  • Die storage box

Frequently Asked Questions

Does the Forster 7mm PRC Full Length Die Set come with a shell holder?

No, the shell holder is sold separately. If you're running this set in a Forster Co-Ax press, you won't need one at all since the Co-Ax uses sliding jaws instead of a traditional shell holder. For any standard 7/8-14 press, pick up the shell holder your press maker recommends for the 7 PRC case head.

Is this the bushing or micrometer version of the 7mm PRC die set?

No, this is the standard Bench Rest set. It includes a conventional full length sizing die with the E-Z Out expander ball and a standard Bench Rest seater die. If you want adjustable neck tension or a micrometer seating adjustment, those are separate Forster bushing and Ultra Micrometer sets.

What makes the Forster Bench Rest seater die different from a standard seater?

The Bench Rest seater uses a sliding sleeve that aligns the case, bullet, and seating stem before the bullet is pushed into the neck. It supports the full outside diameter of the case rather than just the neck, which is why these seaters are known for producing very low bullet runout. It's a non-crimping, straight-line design aimed at match-grade concentricity.

Will this 7mm PRC die set work in presses other than Forster?

Yes. Both dies use the common 7/8-14 thread, so they'll fit standard single-stage and turret presses. The die body also works in a Forster Co-Ax press, giving you flexibility no matter what you load on.

Additional information

UPC

757253990427

Manufacturer

Manufacturer Part Number

004390

Shipping Weight

1.59

Reviews

There are no reviews yet.

Be the first to review “Forster 7mm PRC Bench Rest Full Length Die Set (Sizer + Seater)”