0
0

Forster Ultra Micrometer Seater Die – 8.6 Blackout

UPC: 757253989889

$118.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload for 8.6 Blackout and care about consistency, a quality seater die is where a lot of accuracy is won or lost. The Forster Ultra Micrometer Seater Die takes everything that made the original Bench Rest seater a benchmark and adds a precise micrometer head on top, so you can set your seating depth once, write down the number, and come right back to it later. The die runs a spring-loaded sliding sleeve that captures the case and fully supports it before the bullet ever starts moving, which keeps the bullet and case in alignment through the whole seating stroke. That straight-line, co-axial design is the reason these dies have a reputation for low runout.

What the Micrometer Head Brings to Your 8.6 Blackout Loads

The micrometer adjustment is the headline feature here. You can fine-tune seating depth in either direction in .001 inch increments, and it's sensitive enough to work down to about .0005 inch when you're chasing the lands. The gradations are marked clearly with bright white numbering that's easy to read and easy to record, so switching between bullet weights or load recipes is as simple as dialing back to a setting you already logged. For a cartridge like 8.6 Blackout that runs heavy, long projectiles across subsonic and supersonic loads, being able to repeat seating depth exactly is a real advantage during load development.

How the Ultra Micrometer Seater Die Fits Your Setup

This is a non-crimping seater, so it focuses purely on clean, aligned bullet seating and leaves crimping to a separate step if you want it. It threads into standard 7/8-14 presses and works great in Forster's own Co-Ax, though it plays nicely with just about any single-stage press on the market. Forster builds these in the U.S.A., and the fit and finish reflect that. If you're building precision 8.6 Blackout ammo and want to cut down on trial and error while tightening up your groups, this die earns its place on the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 8.6 Blackout
  • Die Type: Ultra Micrometer Bullet Seater Die
  • Seating Style: Non-crimping, straight-line (co-axial)
  • Micrometer Adjustment: Fine-tune to .0005 inch, marked in .001 inch increments
  • Thread: Standard 7/8-14
  • Country of Origin: Made in the U.S.A.
  • Manufacturer Part Number: U00130
  • UPC: 757253989889
  • Shipping Weight: 0.55 lbs

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One Forster split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

Does the Forster Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It's built to hold the bullet and case in alignment for clean, straight seating only. If you want to crimp your 8.6 Blackout loads, you'll want to handle that as a separate step with a dedicated crimp die.

How precise is the micrometer adjustment?

The micrometer head lets you fine-tune bullet seating depth in either direction, with marked gradations at .001 inch increments and the ability to work down to roughly .0005 inch. The bright white markings make it easy to read and record your settings, so you can return to a known depth whenever you switch bullets or revisit a load.

Will this die work in my press, or do I need a Forster Co-Ax?

It uses a standard 7/8-14 thread and fits most common single-stage reloading presses. It works especially well in a Forster Co-Ax, but you don't need one. If you're running a non-Forster press, just use the shellholder recommended by your press maker.

What makes this better than a standard seater die for 8.6 Blackout?

The sliding sleeve captures and aligns the case before the bullet moves, which produces straight-line seating and helps keep runout low. On top of that, the micrometer head takes most of the trial and error out of setting seating depth. For precision 8.6 Blackout handloading with long, heavy bullets, that repeatability pays off.

Additional information

UPC

757253989889

Manufacturer

Manufacturer Part Number

U00130

Shipping Weight

0.55

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die – 8.6 Blackout”