Description
Neck walls that aren't uniform in thickness are one of the quiet accuracy killers in handloaded rifle ammo. When one side of the neck is thicker than the other, the bullet releases unevenly at ignition and you get a slight misalignment with the bore. The Forster Outside Neck Turner is built to fix that by shaving brass off the outside of the neck wall so it comes out even all the way around.
What sets this one apart from a lot of the hand tools out there is how it references the case. Hand-held turners center only on the pilot, but this accessory turns the neck concentric to the case's true axis once it's mounted on your trimmer. The result is uniform wall thickness and an exact outside neck diameter, and when it's adjusted properly it'll hold that to within a tolerance of .0001 inch.
How the Forster Neck Turner Runs
The unit installs right over the Case Trimmer Cutter Shaft and uses an adjustable circular carbide cutter that's built to last for years of regular use. You control the feed rate by rotating the feeder cam while the cam follower and mechanical stop manage the length of the cut, so every case gets worked the same way. Carbide means no sharpening and clean, consistent cuts session after session.
Fit, Calibers, and What to Know Before You Buy
This is an accessory, not a standalone tool. It mounts onto a Forster Original or Power Case Trimmer, so you'll need one of those already on the bench. It handles any neck diameter from .204 inch up to .375 inch by swapping to the correct pilot, which is sold separately, and cases longer than .375 Magnum (2.94 inches) call for a Long Case Trimmer Base. One thing worth knowing up front: necks should be resized and expanded before you turn them, since that gives the pilot a true reference to work against.
Why Reloaders Reach for the Outside Neck Turner
Folks who've run it on everything from 243 brass to reformed cases tend to find it does exactly what it promises once the setup is dialed in. It takes a little patience to get the cutter and feed set the first time, but after that you've got a repeatable process that rivals far pricier dedicated rigs. For precision and benchrest loaders chasing tighter groups, uniform neck tension is hard to beat for return on effort.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: OT1010
- UPC: 757253005107
- Type: Outside Neck Turner Accessory
- Cutter: Adjustable circular carbide
- Fits: Forster Original and Power Case Trimmers
- Neck Diameter Range: .204 in to .375 in
- Tolerance: Within .0001 in when properly adjusted
- Feed Control: Feeder cam with mechanical stop
- Caliber/Gauge: Universal
- Country of Origin: USA
- Shipping Weight: 0.325 lb
What’s Included
- Outside Neck Turner cutter head
- Feeder cam
- Metal stop
- Allen wrench
Frequently Asked Questions
Do I need a trimmer to use the Forster Outside Neck Turner?
Yes. This is an accessory that mounts onto a Forster Original or Power Case Trimmer and installs over the Case Trimmer Cutter Shaft. You'll need one of those trimmers already set up before this will do anything on its own.
Are pilots included with the Outside Neck Turner?
No, pilots are sold separately and are required to run the tool. You use a dedicated Outside Neck Turner pilot in place of the standard trimmer pilot, and it covers any neck diameter from .204 inch up to .375 inch when you match the correct pilot. Forster offers many standard sizes along with custom-machined options.
How accurate is the Forster Neck Turner?
When it's set up and adjusted properly, it will turn necks to within a tolerance of .0001 inch. It turns the neck concentric to the case's true axis rather than just referencing the pilot like hand-held turners do, which is a big part of why it produces such uniform wall thickness and exact outside diameter.
Should I turn necks before or after sizing?
Cases should have their necks resized and expanded before you turn the outside of the necks. That step gives the pilot a true, consistent reference to work against so the cutter removes brass evenly all the way around.



Reviews
There are no reviews yet.