Description
Checking headspace is one of those steps you don't skip, and the Forster GO gage for .22-250 Remington makes it straightforward. Drop it in the chamber, close the action, and you have a precise reference for the minimum chamber dimension. If the bolt closes on a GO gage, the chamber will accept ammunition made to SAAMI specs, which is exactly what you want to confirm on a freshly reamed barrel or a used rifle you're sizing up.
Forster builds these to serious standards. Each gage is machined from A2 tool steel and ground to a headspace tolerance of plus or minus .00015 inches, then inspected with NIST-certified measurement tools. That kind of precision is why the proper use of a headspace gage is considered the most dependable way to verify rifle chamber length, and why excessive headspace matters so much: it hurts accuracy and can let unsupported brass rupture under pressure.
Where the .22-250 GO Gage Fits In
The GO gage corresponds to the minimum chamber dimension. It's the first stop when a gunsmith finish-chambers a new barrel, since it confirms the chamber is deep enough to safely accept factory ammo. For a bolt gun, most smiths set headspace somewhere between the GO and NO-GO dimensions, so the GO reference is the foundation the rest of the setup is built on. This particular gage runs the GO length for the .22-250 Remington, roughly 1.574 inches.
Why Reach for the Forster Headspace Gage
The .22-250 is a flat-shooting, high-velocity cartridge that earns its keep on varmints and predators, and brass worked that hard deserves a chamber that's dialed in. Pairing this GO gage with a NO-GO gage gives you both ends of the acceptable window when you're installing a barrel. On its own, it's an excellent tool for confirming a chamber will headspace properly on SAAMI-spec ammo. Built in the USA, it's the sort of tool you buy once and keep on the bench for years.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG2225G
- UPC: 757253004544
- Caliber: .22-250 Remington
- Gage Type: GO Length
- Cartridge Base: Rimless
- GO Length: Approx. 1.574 in
- Material: A2 Tool Steel, Hardened
- Tolerance: ±.00015 in
- Specification: SAAMI Dimensioned
- Overall Length: 1.575 in
- Color: Steel
- Quantity: 1
- Country of Origin: USA
What’s Included
- One Forster .22-250 Remington GO length headspace gage (HG2225G)
Frequently Asked Questions
What does the GO gage tell me about my .22-250 chamber?
The GO gage represents the minimum chamber dimension for the .22-250 Remington. If the bolt closes on it, the chamber is deep enough to accept ammunition made to SAAMI specifications. It's the baseline check when finish-chambering a new barrel or verifying a used rifle will headspace correctly.
Do I need the NO-GO gage too, or is the GO gage enough?
It depends on the job. A GO gage alone is great for confirming a chamber will accept SAAMI-spec ammo. If you're installing or setting a barrel, most smiths use both the GO and NO-GO gages so they can set headspace in the acceptable window between the two dimensions.
What is this Forster headspace gage made from?
It's machined from A2 tool steel and hardened for a long service life. Forster grinds each gage to a tolerance of plus or minus .00015 inches and inspects them with NIST-certified tools, so you're working off a precise, repeatable reference every time.
Does this gage work with any .22-250 rifle?
Yes, it's a rimless, SAAMI-dimensioned gage made specifically for the .22-250 Remington, so it suits bolt actions and other rifles chambered for that cartridge. Keep in mind the GO gage checks the minimum dimension, which is most useful for chambering work and headspace verification rather than everyday shooting.




Reviews
There are no reviews yet.