Description
Headspace is one of those things you don't think about until it matters, and when it matters, it really matters. This Forster GO gage gives you a fast, reliable way to confirm that your .223 Remington or 5.56 NATO chamber is cut correctly before you ever send a round downrange. Drop it in, close the bolt, and you've got your answer. If the action closes on the GO gage, the chamber will accept ammunition made to SAAMI maximum specifications. It's the same basic check gunsmiths have relied on for decades, no guesswork required.
What the Forster .223 GO Gage Tells You
Think of this as the minimum side of the equation. The GO dimension represents the shortest acceptable chamber length, so passing it means your chamber isn't cut too tight. Builders typically pair a GO gage with a NO-GO to confirm the chamber falls within the proper window, but the GO is the first and most important check when you're headspacing a fresh barrel or spinning a new upper together. This particular gage also works for 6x45mm chambers, which makes it handy if you dabble in wildcats off the .223 case.
Why Forster Headspace Gages Earn Their Keep
Forster has been grinding these out in the USA to tight, repeatable tolerances, and that consistency is the whole point of a measuring tool. Each one is machined from hardened steel and clearly marked with the caliber and gage type right on the body, so there's no mixing up your GO and NO-GO mid-build. Folks who run several rifles or build regularly tend to keep a set on hand, and the feedback across the board is that the dimensions check out dead on arrival.
Whether you're assembling your first AR, rebarreling a bolt gun, or just doing a periodic safety check on a rifle that's seen a lot of rounds, this is the tool that gives you peace of mind. Simple, accurate, and built to last a lifetime of use.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0223G
- UPC: 757253004292
- Caliber: .223 Remington / 5.56 NATO (also checks 6x45mm)
- Gage Type: GO Gauge
- Case Type: Rimless
- Material: Hardened Steel
- Standard: SAAMI Reference
- Country of Origin: USA
- Quantity: 1
- Color: Steel
What’s Included
- (1) Forster .223 Rem / 5.56 NATO GO Headspace Gage (HG0223G)
Frequently Asked Questions
What does it mean if my rifle closes on the Forster GO gage?
If the bolt closes on the GO gage, your chamber meets the minimum length and will accept ammunition made to SAAMI maximum specifications. In other words, the chamber isn't cut too short. This is exactly the result you want to see on a properly headspaced rifle.
Do I need a NO-GO gage too, or is the GO gage enough?
The GO gage confirms the minimum side of the chamber, but to fully verify headspace you'll want a NO-GO to confirm the chamber isn't cut too long. Most builders use both together so the chamber lands within the correct window. The GO is the first and most essential check, and the NO-GO completes the picture.
Will this gage work for 5.56 NATO and 6x45mm chambers?
Yes. This .223 Remington gage also covers 5.56 NATO chambers and works for checking 6x45mm, since it shares the same case head and body dimensions. It's a versatile piece to have on the bench if you run more than one of those chamberings.
Is the Forster gage accurate right out of the package?
Forster machines these from hardened steel in the USA to tight, repeatable tolerances. Users who verify the dimensions with their own measuring tools consistently report they arrive dead on spec. It's a reference-grade tool built to stay accurate over years of use.





Reviews
There are no reviews yet.