0
0

Forster .223 Rem Field Headspace Gage, Rimless Hardened Steel

UPC: 757253004285

$38.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Headspace is the distance between the breech face and the base of the cartridge when the action is closed, and getting it wrong is a bigger deal than most folks realize. Too much headspace can let unsupported brass rupture and vent gas rearward, which is both dangerous and hard on accuracy. This Forster gage gives you a straightforward mechanical way to check a .223 Remington chamber against the field dimension, which represents the longest length still considered safe for a rifle already in service.

What the Forster Field Gage Tells You

Forster builds three lengths per caliber: GO, NO-GO, and FIELD. The field gage sits at the top of the stack. If your bolt closes on it, the chamber is sitting at or past the SAAMI maximum and the rifle should be pulled from service until the barrel is addressed. That makes this the gage most home builders and owners reach for first, since it answers the one question that matters most: is this thing safe to shoot? The .223 field gage measures right around 1.4696 inches, and it also doubles for checking 6mm x 45 chambers.

How the .223 Field Gage Is Made

These are machined from hardened steel and precision ground to ANSI and SAAMI tolerances, with the headspace dimension held to a tight plus or minus .00015. That kind of consistency is why Forster gages have been a shop standard for decades. One point worth knowing: .223 Remington and 5.56 NATO chambers share the same case dimensions but differ in throat and leade, and the 5.56 spec allows slightly more headspace. Because of that, many builders use a .223 field gage as a conservative maximum check on a 5.56 barrel, which keeps you comfortably under the military limit. If you want a true 5.56 reading, Forster makes dedicated NATO gages for that.

Keep it clean, keep it oil-free when you test, and run your gages as a matched set from the same maker for the most trustworthy results.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: HG0223F
  • UPC: 757253004285
  • Caliber: .223 Remington (also checks 6mm x 45)
  • Gage Length: FIELD
  • Case Type: Rimless
  • Nominal Dimension: Approx. 1.4696 in
  • Headspace Tolerance: +/- .00015 in
  • Material: Hardened Steel
  • Overall Length: 1.47 in
  • Color: Steel
  • Quantity: 1
  • Country of Origin: USA

What’s Included

  • One Forster .223 Rem FIELD length rimless headspace gage (HG0223F)

Frequently Asked Questions

What does it mean if my bolt closes on the Forster .223 field gage?

If the bolt closes fully on the field gage, the chamber is at or beyond the SAAMI maximum headspace. That means the rifle is at the edge of, or past, safe limits and should be set aside until the barrel or bolt is corrected by a gunsmith. The field gage is specifically there to flag a chamber that has grown too long to run safely.

Can I use this .223 field gage on a 5.56 NATO barrel?

You can, and many builders do, but understand the difference first. The .223 and 5.56 chambers share the same case dimensions, but 5.56 allows slightly more headspace, so a .223 field gage acts as a conservative maximum check that keeps you under the military limit. If you want a reading built to true 5.56 spec, Forster makes dedicated NATO gages for that purpose.

What is the difference between a GO, NO-GO, and FIELD gage?

The GO gage confirms the chamber is at least minimum length so it will accept in-spec ammo, and the NO-GO checks that it hasn't drifted past the preferred maximum for a new build. The FIELD gage is the longest of the three and represents the absolute maximum safe headspace for a rifle already in service. Most home builders reach for the field gage first since it answers the safety question directly.

Do I need the matching GO and NO-GO gages too?

It depends on what you're doing. If you're chambering new barrels you'll want the GO and NO-GO to set headspace precisely between those two dimensions. For simply verifying that an assembled rifle or a new BCG is safe to shoot, the field gage on its own does the job. When you do run multiple gages, use a matched set from the same maker for consistent results.

Additional information

UPC

757253004285

Manufacturer

Manufacturer Part Number

HG0223F

Color

Steel

Length

1.47''

Quantity

1

Shipping Weight

0.05

Style

Field Gauge

Reviews

There are no reviews yet.

Be the first to review “Forster .223 Rem Field Headspace Gage, Rimless Hardened Steel”