Description
If you reload 7mm rifle rounds long enough, you'll eventually need to take one apart, whether it's to fix a seating depth, swap a bullet, or salvage components from a load that didn't pan out. The Forster #284 Bullet Puller Collet is the caliber-matched insert that makes that happen on the Forster Standard or Universal Bullet Puller. It's machined to grab .284" bullets, which covers 7mm projectiles across cartridges like the 7mm-08, .280 Remington, 7mm Rem Mag, and 7mm PRC.
The beauty of the Forster collet system is how it uses your press to do the work. As you raise the ram, the pull tightens the collet's grip on the bullet instead of letting it slip, so the round comes apart with the case neck intact and the bullet undamaged. That means you get to reuse your components rather than tossing them, and there's no pounding away with a hammer-style puller and dumping powder everywhere.
What Sets the Forster #284 Collet Apart
This one is built from solid steel, heat treated for durability, and hand polished so it runs smooth when you cinch it down on a bullet. It threads into either the Forster Standard Bullet Puller or the Universal Bullet Puller body, and setup takes nothing more than a 9/16" wrench to snug the collet screw against the bullet. Keep in mind these are specific to the bullet pullers and won't swap into a Forster case trimmer.
Picking the Right Forster Bullet Puller Collet
Forster builds these collets by bullet diameter rather than cartridge name, so the #284 handles anything running a .284" bullet regardless of what the case is stamped. Each collet is marked with its diameter so you can tell them apart at a glance when you've got a few on the bench. A dab of grease on the tapered portion before you insert it keeps everything moving like it should. If you already own the puller body, this is the piece that rounds out your 7mm reloading setup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BP2284
- Model: Collet #284
- UPC: 757253003011
- Bullet Diameter: .284" (7mm)
- Caliber: .284 Caliber
- Material: Solid steel, heat treated
- Finish: Hand polished
- Compatibility: Forster Standard and Universal Bullet Pullers
- Tool Required: 9/16" wrench to tighten collet screw
- Quantity: 1 collet
What’s Included
- One Forster #284 bullet puller collet (.284" / 7mm)
Frequently Asked Questions
What bullets does the Forster #284 collet work with?
It's sized for .284" diameter bullets, which is the standard 7mm projectile size. That covers cartridges like the 7mm-08 Remington, .280 Remington, 7mm Remington Magnum, and 7mm PRC. The collet grips by bullet diameter, so the cartridge stamp doesn't matter as long as it uses a .284" bullet.
Does this collet come with the bullet puller, or do I need to buy the puller separately?
This is just the collet. You'll need the Forster Standard Bullet Puller or the Universal Bullet Puller body to use it. Forster sells the collets separately by caliber so you only buy the diameters you reload.
Will the Forster #284 collet fit my press?
It fits inside either Forster bullet puller body, and those pullers thread into presses with a standard 7/8"-14 die thread, including the Forster Co-Ax. Once the puller body is set up, you drop in the collet, tighten the collet screw with a 9/16" wrench, and you're ready to pull bullets. Note that these collets are not interchangeable with Forster case trimmer collets.
Why use a collet puller instead of a hammer-style puller?
A collet puller uses the leverage of your press, so raising the ram tightens the grip on the bullet and draws the round apart smoothly. The bullet and case neck come out undamaged and the powder stays in the case, which means you can reuse your components. It's a cleaner, quieter approach than banging rounds apart with an impact puller.




Reviews
There are no reviews yet.