0
0

Forster Bench Rest Full Length Die Set .223 Rem (2-Die)

UPC: 757253000256

$115.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster has been making some of the straightest-seating dies on the market for decades, and this two-die Bench Rest set for .223 Remington is a big reason why. It pairs a full length sizing die with Forster's original straight-line Bench Rest Seater Die, giving you everything you need to resize spent brass and seat bullets with the kind of consistency that shows up on paper.

The full length sizer handles the whole job in one stroke. It sizes the neck, shoulder, and body, sets headspace, deprimes, and expands the case neck so your brass drops back into any SAAMI-spec chamber with minimal play. The standout feature is the elevated E-Z Out expander ball, which sits higher in the die to give you better mechanical advantage on the expansion stroke and pulls the neck back into alignment rather than yanking it off center. That translates to less neck runout before the bullet ever touches the case.

What Makes the Bench Rest Seater Die Special

The seater is the piece that put Forster on the map. Instead of a conventional seating stem, it uses a caliber-specific sliding die chamber that cradles the bullet and case in near-perfect alignment before the bullet is ever pressed in. The concentric channel runs just slightly larger than bullet diameter, so everything stays on a common axis during seating. It's a non-crimping design, which keeps the focus squarely on alignment and repeatable seating depth.

Fit and Build on the .223 Rem Die Set

Both dies are machined from case-hardened steel and hand-polished before and after heat treating for a smooth finish that keeps sizing effort low. They thread into standard 7/8-14 presses, so they'll work with your Co-Ax, single stage, or turret setup. One note worth passing along: if you're running military brass with crimped primers, you'll want to remove those spent primers with a dedicated decapping die first.

Who Reaches for the Forster .223 Set

This set is a favorite among precision rifle folks loading for bolt guns and ARs who care about concentricity. It's the straight-ammo baseline a lot of reloaders measure everything else against.

Key Specifications

  • Caliber: .223 Remington
  • Set Type: 2-Die Set (Full Length Sizer + Bench Rest Seater)
  • Seater Style: Standard Bench Rest Straight-Line Seater (non-crimping)
  • Sizer Type: Full Length Sizing Die with E-Z Out expander ball
  • Material: Case-hardened, hand-polished steel
  • Thread: 7/8-14 (standard press compatible)
  • Locking Ring: Forster Cross Bolt Die Locking Ring
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004101
  • UPC: 757253000256
  • Shipping Weight: 1.3 lb

What’s Included

  • One Full Length Sizing Die (with decapping/expander unit)
  • One Bench Rest Seater Die
  • Forster Deluxe Die Box

Frequently Asked Questions

Does the Forster Bench Rest Die Set for .223 include a micrometer seater?

No, this is the standard Bench Rest two-die set, so the seater uses a threaded stem adjustment rather than a micrometer top. It still gives you the same straight-line seating alignment as Forster's Ultra model. If you want a dialed-in numbered micrometer head for swapping between multiple bullets, that's the separate Ultra Micrometer version.

Will these dies work in my standard press?

Yes. Both dies use the common 7/8-14 thread, so they fit standard single stage, turret, and Co-Ax presses. Keep in mind a shell holder is not included, so grab the correct one for the .223 case head if you don't already have it.

Can I load .223 Rem and 5.56 NATO brass with this set?

The full length sizer brings cases back to SAAMI spec so they'll chamber reliably, and plenty of reloaders run both .223 and 5.56 brass through it. One tip for military 5.56 cases: those often have crimped primer pockets, so you'll want to deprime with a dedicated decapping die first to avoid putting extra stress on the sizer's decapping pin.

What makes the Forster full length sizer different from a basic sizing die?

The big difference is the elevated E-Z Out expander ball, which rides higher in the die for better mechanical advantage during the neck expansion stroke. That design helps pull the neck back into alignment instead of tugging it off center, which keeps runout low. Combined with the hand-polished interior, it makes for smooth, consistent sizing.

Additional information

UPC

757253000256

Manufacturer

Manufacturer Part Number

004101

Shipping Weight

1.3

Reviews

There are no reviews yet.

Be the first to review “Forster Bench Rest Full Length Die Set .223 Rem (2-Die)”