Description
The .277 Sig Fury is a newer cartridge pushing serious pressure, and getting your handloads to hold the bullet securely matters. The Lee Precision Factory Crimp Die (part number 91990) is a limited production, cartridge-specific tool built to put a clean, firm crimp on your loaded rounds. It uses a collet that squeezes the case mouth inward from the sides, forming a segmented straight crimp that mimics the look and performance of factory ammo without the downward pressure that can buckle a case.
How the .277 Sig Fury Factory Crimp Die Works
Unlike a roll crimp that relies on the seating die pushing brass against a bullet's cannelure, this collet design presses in from the outside. That means the crimp happens as its own step, independent of your seating depth. One of the big advantages reloaders appreciate is that bullets don't need a crimp groove to benefit, since the collet forms its own grip into the jacket. It's also very forgiving, since you won't crush or crumple a case the way an overdone roll crimp sometimes will.
Why a Firm Crimp Helps Your Sig Fury Loads
A solid crimp does more than just hold the bullet for feeding. It raises the pressure needed before the bullet breaks free of the case, which tends to even out the pressure curve and tighten up velocity spread shot to shot. For a high-pressure round like the .277 Sig Fury, that consistency can translate to better accuracy and ammo that stands up to the rougher cycling of a semi-auto or the bumps of a hunting trip.
Fit and Setup for the .277 Sig Fury Factory Crimp Die
The die uses a standard 7/8-14 thread, so it threads right into any common single stage or turret press. It operates as a separate crimping step after you've seated your bullets, and it is not a carbide die. Keep in mind Sig Fury hybrid-case ammunition is not reloadable, so this die is meant for conventional brass cases chambered in .277 Sig Fury or 6.8×51.
Key Specifications
- Cartridge: 277 Sig Fury (6.8×51)
- Die Type: Collet-Style Factory Crimp Die
- Crimp Style: Segmented straight crimp
- Thread: 7/8-14
- Construction: Non-carbide
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91990
- UPC: 734307919900
- Production: Limited Production
- Shipping Weight: 0.31 lbs
What’s Included
- Lee Precision .277 Sig Fury Factory Crimp Die (91990)
- Instructions
Frequently Asked Questions
Do my bullets need a crimp groove to use the .277 Sig Fury Factory Crimp Die?
No. The collet in this die squeezes the case mouth in from the sides with enough force to form its own grip, so bullets without a cannelure or crimp groove still get a firm, secure crimp. Lee's own testing shows that even bullets with no crimp groove tend to shoot more accurately when crimped this way.
Does the Lee .277 Sig Fury Factory Crimp Die seat the bullet too?
No, it only crimps. Seating is handled separately by your bullet seating die, and this crimp die is run as its own step afterward. That separation is part of why the collet crimp is so repeatable from round to round.
Will this die fit my press?
Yes, it uses the standard 7/8-14 thread found on common single stage, turret, and progressive presses. Just thread it in, set your crimp depth, and you're ready to go. Finger-tighten the lock ring so your setting holds for next time.
Can I reload Sig Fury hybrid-case ammo with this die?
No. The hybrid two-piece case ammunition is not reloadable. This crimp die is intended for conventional brass cases in .277 Sig Fury or 6.8×51.





Reviews
There are no reviews yet.