0
0

Lee Precision Collet Neck Sizing Die Only .300 PRC (91866)

UPC: 734307918668

$22.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .300 PRC on brass that's only ever been fired in your own rifle, this is one of the simplest ways to tighten up your groups without spending a fortune. The Lee Precision Collet Neck Sizing Die uses a steel collet to squeeze the fired case neck against a precision mandrel, giving you a perfectly aligned neck with very little bullet runout. It sizes the neck only, so there's no messing with case lube and no cleanup afterward.

How the .300 PRC Collet Die Works

The magic is in the design. When you run the case up into the die, the collet's fingers get driven into a tapered steel cone, closing down around the neck and pressing the brass tight against the mandrel in the center. Neck tension is set by the mandrel diameter, not by a sized-down case mouth, which is what keeps runout so low. Most folks size, give the case a quarter turn, and size again to even things out. It works best on annealed or softer brass, so if you're a few firings in, a quick neck anneal keeps the collet doing its job.

Why Reloaders Reach for the Collet Neck Sizing Die

Since this die only touches the neck and leaves the body fire-formed to your chamber, your brass takes a lot less abuse and lasts considerably longer before it needs annealing or retirement. The no-lube operation is a real time saver, and the straight necks pay off downrange with the heavy high-BC bullets the .300 PRC is built around. A lot of precision loaders pair it with a separate body or full-length die to bump the shoulder back every few firings once the brass gets snug, then run the collet die to set the neck. Made in the USA, it threads into any standard 7/8-14 press.

Keep in mind this is the collet neck sizing die only, not a full die set, and the .002" undersize decap mandrel is sold separately if you want it.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91866
  • UPC: 734307918668
  • Cartridge: .300 PRC
  • Die Style: Collet Neck Sizing Die Only
  • Gun Type: Rifle
  • Thread: 7/8-14
  • Case Lube Required: No
  • Sizing: Neck only
  • Country of Origin: United States
  • Shipping Weight: 0.44 lbs

What’s Included

  • Lee Precision Collet Neck Sizing Die for .300 PRC
  • Instruction sheet

Frequently Asked Questions

Does the Lee .300 PRC collet die need case lube?

No, and that's one of its best features. The collet design sizes the neck without any lubrication, so there's no greasy brass to wipe down afterward. It keeps your reloading process faster and your cases cleaner.

Will this die bump the shoulder back on my .300 PRC brass?

No, the collet die sizes the case neck only and leaves the body and shoulder alone. That's exactly why your brass stays fire-formed to your chamber and lasts longer. After several firings when the brass gets tight, most reloaders run a separate body or full-length die to bump the shoulder, then finish with the collet die to set neck tension.

Is this a complete die set or just the sizing die?

This is the collet neck sizing die only, not a set, so it does not include a bullet seating die or shell holder. It's meant to work alongside the other dies you're already using for the .300 PRC. The .002" undersize decap mandrel is also sold separately if you want one.

What kind of brass should I use with the collet neck sizing die?

Lee recommends this die for brass that has been fired through your own rifle, since it relies on the case body already being formed to your chamber. The collet works best on softer brass, so annealing the necks every few firings keeps neck tension consistent and the sizing smooth.

Additional information

UPC

734307918668

Manufacturer

Manufacturer Part Number

91866

Shipping Weight

0.44

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Collet Neck Sizing Die Only .300 PRC (91866)”