Description
The Lee Precision 44 Special/Magnum Carbide Deluxe 4-Die Set covers both the mild-mannered .44 Special and the hard-hitting .44 Magnum from one box, which is handy since the two cartridges share the same case diameter. Whether you're loading soft practice rounds for the range or stout magnum loads for hunting and your lever gun, this set gives you everything to size, charge, seat, and crimp your own ammo. The carbide sizing die is the standout here, because the hardened carbide ring means you can skip case lube entirely and still get smooth, consistent resizing.
What Comes in the 44 Special/Magnum Deluxe Die Set
This is a true four-die setup. You get a carbide full length sizing die, a powder through expanding die, a micrometer bullet seating die, and the Lee Carbide Factory Crimp Die. The micrometer seating die lets you dial in and return to a repeatable seating depth, which is a real benefit when you switch between bullet weights and profiles. The Factory Crimp Die is the piece a lot of handloaders swear by, since it post-sizes the loaded round so anything that passes through it will chamber properly in your gun.
Fit and Compatibility of the Lee 44 Carbide Die Set
These dies use the standard 7/8-14 thread, so they'll thread right into common single stage and turret presses from Lee, RCBS, Hornady, Lyman, and Dillon. A universal shell holder and powder dipper come in the box along with printed instructions and load data for both the .44 Special and .44 Magnum, so you've got a starting point whether you're brand new to reloading or adding another caliber to your bench. Ultimate lock rings come installed on all the dies to help hold your settings.
One tip worth passing along: if you're loading .44 Magnum, take a minute to read the included directions before you start, since the longer case and heavier roll crimp benefit from proper die adjustment. Set up right, this kit turns out clean, well-formed rounds load after load.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90966
- UPC: 734307909666
- Caliber: .44 S&W Special / .44 Magnum
- Product Type: Deluxe Carbide 4-Die Set
- Number of Dies: 4
- Die Material: Carbide (sizing)
- Seating Die: Micrometer Bullet Seating Die
- Thread Size: 7/8-14
- Shell Holder: Universal, included
- Lock Rings: Ultimate Lock Rings installed
- Length: 5.8 in
- Shipping Weight: 1.3 lb
What’s Included
- Carbide Full Length Sizing Die
- Powder Through Expanding Die
- Micrometer Bullet Seating Die
- Carbide Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Instructions and load data for .44 Special and .44 Magnum
Frequently Asked Questions
Does this Lee die set load both .44 Special and .44 Magnum?
Yes. The set is built for both the .44 S&W Special and the .44 Magnum, which share the same case diameter. The included instructions carry load data for both cartridges, so you can switch between them with the same tooling.
Do I need case lube with these carbide dies?
No. The carbide sizing die lets you resize straight-walled pistol brass without lube, which saves a step and keeps your brass clean. Many reloaders consider this one of the best features of the set.
Will these dies fit my press?
They use the standard 7/8-14 thread, so they fit common single stage, turret, and progressive presses from Lee, RCBS, Hornady, Lyman, and Dillon. A universal shell holder is included in the box.
What does the Carbide Factory Crimp Die do?
It applies the crimp and then post-sizes the entire loaded round. That means any cartridge that passes through the die will chamber properly in your revolver or carbine, which adds a nice layer of reliability to your handloads.





Reviews
There are no reviews yet.