Description
The Lee Factory Crimp Die for .270 WSM is a single-stage die built to put a clean, repeatable crimp on your .270 Winchester Short Magnum handloads. Instead of relying on a roll crimp from your seating die, this one uses a collet that squeezes the case mouth evenly onto the bullet. That firmer hold raises the start pressure needed before the bullet moves, which smooths out your pressure curve and tightens up velocity spread from shot to shot. Even bullets with no crimp groove tend to shoot more accurately once they get this treatment.
How the .270 WSM Factory Crimp Die Works
This is the bottleneck rifle version, so it runs on a collet system rather than a carbide sizing ring. As the die contacts the shell holder, four fingers close inward on the case neck and form the mouth into the bullet all the way around. The crimp happens as a separate operation from seating, so it isn't tied to your bullet seating depth adjustments. That separation is a big reason reloaders like it. It's far easier to get consistent tension with the collet than fussing a roll crimp in a seating die, and it's nearly impossible to buckle a case the way you can with conventional crimpers.
Setting Up and Using Your Lee Factory Crimp Die
Setup is straightforward. Seat your bullets first with your regular seating die, then run the loaded round into the Factory Crimp Die to add the crimp. Start light and work up, since a heavy crimp on a smooth-sided bullet can deform it. A little goes a long way here. The die threads into any standard 7/8"-14 press, so it drops right into whatever setup you're already running.
Made from steel and packed in a plastic storage container, this is a worthwhile add-on for anyone loading .270 WSM for hunting or range work. If you want factory-grade bullet hold and more uniform numbers over the chronograph, it earns its spot on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90962
- UPC: 734307909628
- Caliber: .270 WSM (Winchester Short Magnum)
- Die Type: Factory Crimp Die (Collet Style)
- Gun Type: Rifle
- Crimp Style: Collet Crimp
- Thread: 7/8"-14 (fits standard presses)
- Material: Steel
- Length: 4.75 in
- Shipping Weight: 0.25 lbs
What’s Included
- Lee .270 WSM Factory Crimp Die
- Plastic storage container
Frequently Asked Questions
Does the Lee Factory Crimp Die for .270 WSM seat the bullet too?
No, this die only applies the crimp. You'll still seat your bullets with your regular seating die first, then run the loaded round into the Factory Crimp Die as a separate step. Keeping crimp separate from seating is actually one of the reasons the collet design gives such consistent results.
Do my bullets need a crimp groove or cannelure to use this die?
No. The collet squeezes the case mouth evenly onto the bullet, so it works with or without a crimp groove. Tests show that even smooth-sided bullets tend to shoot more accurately with this crimp, though you'll want to keep the crimp on the lighter side with non-grooved bullets to avoid deforming them.
Will the .270 WSM Factory Crimp Die fit my press?
Yes, it uses the standard 7/8"-14 thread, so it threads into any common single-stage or turret press. There's no special adapter needed, it drops right in alongside your existing dies.
Is this the collet type or the carbide type die?
Since .270 WSM is a bottleneck rifle cartridge, this is the collet-style Factory Crimp Die. The carbide-ring versions are for straight-wall pistol and revolver cases. This one uses four collet fingers that close in on the case neck to form the crimp, and it's nearly impossible to buckle a case with it.




Reviews
There are no reviews yet.