Description
Crimping bottleneck rifle brass has always been tricky, and the Lee Precision Factory Crimp Die for .356 and .358 Winchester takes the headache out of it. Instead of relying on a roll crimp that fights you on case length, this die uses a collet that gently squeezes the very end of the case into the bullet, giving you a clean, firm crimp that mimics what you'd get from factory ammo. Trim length isn't critical here, which is a real time saver when you're running mixed brass.
How the .356/.358 Win Factory Crimp Die Works
The collet closes in around the case mouth and forms a tight, segmented crimp that holds the bullet solid. Because it builds a little more start pressure before the bullet moves, you get a more uniform pressure curve and tighter velocity spreads downrange. Lee's testing has shown that even bullets without a crimp groove or cannelure can shoot more accurately once they're crimped this way, so you're not limited to bullets with a factory groove.
Why Lever-Gun Loaders Reach for This Die
If you're feeding a lever action chambered in .356 or .358 Winchester, a firm crimp matters more than most folks realize. Rounds stacked in a tubular magazine take a beating from recoil and the weight of the cartridges behind them, and a loose bullet can get pushed deeper over time. This die gives you the kind of hold that keeps your loads consistent and able to handle rough field use.
Fit and Setup on the .356/.358 Factory Crimp Die
The die is machined from hardened steel and threads into any press with standard 7/8 inch by 14 threads, so it drops right into your existing setup. An adjustment screw lets you dial in exactly how much crimp you want, and you won't buckle a case the way a roll crimp die sometimes will. Keep in mind a shell holder is sold separately, and a little case lube helps things run smooth. It ships in a fitted plastic storage case with full instructions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90904
- UPC: 734307909048
- Cartridge: .356 Winchester / .358 Winchester
- Die Type: Factory Crimp Die (Collet Style)
- Crimp Style: Segmented straight crimp
- Material: Hardened Steel
- Thread Size: 7/8 inch x 14
- Application: Rifle Cartridge Reloading
- Country of Origin: United States
- Shipping Weight: 0.3813 lb
What’s Included
- Hardened steel .356/.358 Winchester Factory Crimp Die
- Fitted plastic storage case
- Instructions
Frequently Asked Questions
Does the Lee Factory Crimp Die work on bullets without a crimp groove?
Yes. The collet is strong enough to form its own crimp into the bullet, so a cannelure or crimp groove isn't required. Lee's testing has shown that even groove-free bullets can shoot more accurately once crimped with this die.
Do I need a shell holder for the .356/.358 Win Factory Crimp Die?
A shell holder is not included with this die and is sold separately. You'll want the correct shell holder for .356 or .358 Winchester brass to run it in your press. Most reloaders already have the matching holder from their sizing and seating setup.
Will this Factory Crimp Die fit my reloading press?
It uses standard 7/8 inch by 14 threads, so it fits virtually any common single-stage or turret press on the market. That makes it an easy add to your existing .356 or .358 Winchester die setup. Just thread it in and dial in your crimp with the adjustment screw.
Why use a crimp die on rounds for a lever action rifle?
In a tubular magazine, cartridges stack under spring tension and recoil, which puts constant pressure on the bullets. A firm crimp keeps bullets from being pushed deeper into the case over time. This die delivers that solid hold so your loads stay consistent and feed reliably.





Reviews
There are no reviews yet.