Description
The .375 H&H Magnum is a brute, and when you are loading a cartridge that kicks like this one, bullet movement under recoil is a real concern. The Lee Factory Crimp Die for .375 H&H solves that with a collet-style design that squeezes the case mouth into a firm crimp, holding your bullet right where you set it from the first round to the last in the magazine.
Unlike a traditional roll crimp die, this one uses a collet that closes down evenly around the case neck. That means you get a clean, repeatable crimp without the risk of buckling the case, which can happen when you lean too hard on a standard crimp die. It works whether or not your bullet has a cannelure, since the collet is strong enough to form its own groove in the jacket. For a dangerous-game or safari cartridge where every round needs to chamber and fire without drama, that kind of consistency matters.
What the Lee .375 H&H Crimp Die Brings to the Bench
The crimp is fully adjustable. You just turn the screw up top to dial in exactly how much crimp you want, so you can match it to your load and bullet profile. A firmer crimp also helps build more uniform start pressure before the bullet moves, which tends to smooth out your velocity spread and tighten groups, especially with slower magnum powders common in big-bore loads.
Setting Up the 90850 on Your Press
This is a standalone single die, so it is a smart add-on if you already own a .375 H&H die set and want a dedicated crimp step. It threads into any standard 7/8"-14 reloading press, and because trim length is far less critical with this design than with a roll crimp, setup is quick and forgiving. The die body is steel and it ships in a plastic storage box with an instruction sheet, so it is ready to go the moment it hits your bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90850
- UPC: 734307908508
- Caliber: .375 H&H Magnum
- Die Type: Factory Crimp Die (rifle collet style)
- Crimp Mechanism: Collet
- Dies in Set: 1
- Carbide: No
- Press Thread: 7/8"-14
- Body Material: Steel
- Adjustment: Adjustable crimp screw
- Length: 4.7 in
- Country of Origin: United States
What’s Included
- Lee Factory Crimp Die for .375 H&H Magnum (single die)
- Plastic storage box
- Instruction sheet
Frequently Asked Questions
Does the Lee Factory Crimp Die for .375 H&H include a shellholder?
No, this is a single standalone die and a shellholder is not included. You will need the correct shellholder for the .375 H&H case head if you do not already have one. It ships in a plastic storage box with an instruction sheet.
Will this crimp bullets that do not have a cannelure or crimp groove?
Yes. The collet design is strong enough to form its own groove in the bullet jacket, so a crimp cannelure is not required. That makes it handy if you are loading hunting bullets that come without a crimp ring.
What type of press does the 90850 die fit?
It threads into any standard reloading press with 7/8"-14 threads, which covers the vast majority of single-stage and turret presses on the market. Setup is quick, and trim length is far less critical than it is with a traditional roll crimp die.
Is this the carbide version of the Lee Factory Crimp Die?
No. This .375 H&H die is the rifle collet-style Factory Crimp Die, which uses a collet to squeeze the case mouth rather than a carbide sizing ring. It is purpose-built for crimping heavy rifle bullets that need to stay put under the stout recoil of the .375 H&H.





Reviews
There are no reviews yet.