Description
The Lee Factory Crimp Die in .35 Remington is a single die that does one job and does it well: putting a clean, consistent crimp on your bottleneck rifle brass. Instead of relying on a roll crimp built into a seating die, this one uses a collet that gently squeezes the end of the case into the bullet's crimp groove, giving you the same kind of hold you'd expect from factory loaded ammo. For a cartridge like the .35 Remington that often rides in tube magazines and lever guns, that firm, uniform crimp matters a lot.
Why the .35 Remington Factory Crimp Die Earns a Spot on Your Bench
Reloaders who run .35 Remington through tube-fed rifles know the frustration of bullets getting shoved deeper into the case under recoil, or creeping out on the ones waiting in the magazine. A solid crimp solves that. Lee's testing shows that a firm crimp builds higher start pressure, which smooths out the pressure curve and tightens up velocity spreads. Even bullets with no cannelure tend to group better once they're crimped in place. It's also a lot harder to buckle a case with the collet design than with a traditional roll crimp.
Setting Up the Lee .35 Rem Crimp Die
The die uses standard 7/8-14 threads, so it drops right into any single-stage or turret press you're already running. A simple adjusting screw lets you dial in exactly how much crimp you want for your particular bullet and load, and because the collet works off the case mouth, trim length isn't nearly as fussy as it is with roll crimping. Case lubrication is recommended for smooth operation. Keep in mind you'll need the correct shell holder, which is sold separately.
A Smart Add for Pacesetter Set Owners
This same die comes bundled in Lee's Pacesetter 3-die sets, but buying it on its own is a great move if you started with a two-die set or just want to add crimping to your process. It's a budget-friendly way to get more consistent, dependable hunting ammo out of your .35 Remington without buying a whole new die set.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90828
- UPC: 734307908287
- Caliber: .35 Remington
- Die Style: Factory Crimp Die (Collet)
- Cartridge Type: Bottleneck Rifle
- Material: Hardened Steel
- Carbide: No
- Number of Dies: 1
- Thread Size: 7/8-14
- Application: Rifle Cartridge Reloading / Hunting
- Length: 4.75 in
- Country of Origin: United States
What’s Included
- Lee .35 Remington Hardened Steel Factory Crimp Die
- Plastic storage case
- Instructions
Frequently Asked Questions
Do I need a shell holder with the Lee Factory Crimp Die .35 Remington?
Yes, a shell holder is required and is sold separately. If you already reload .35 Remington with a Lee die set, the shell holder you're using will work fine with this crimp die. Just make sure you've got the correct size for the cartridge.
Will this die fit my press?
It uses standard 7/8-14 threads, so it fits virtually any single-stage, turret, or progressive press that accepts common reloading dies. There's no special adapter needed. Thread it in, set the adjusting screw, and you're ready to crimp.
Does the .35 Remington Factory Crimp Die work on bullets without a cannelure?
It does. The collet squeezes the case mouth into the bullet to create a crimp even when there's no crimp groove present. Lee's testing shows that crimping in this way can actually improve accuracy and tighten velocity spreads on those bullets.
Is this a carbide die?
No, this .35 Remington version is a hardened steel rifle Factory Crimp Die, not carbide. Because it's a bottleneck rifle cartridge, case lubrication is recommended for smooth operation. The carbide Factory Crimp Dies are a separate product line made for straight-wall pistol cartridges.





Reviews
There are no reviews yet.